Powered by InfodriveIndia.com

Chapter - 72 Iron and Steel and their products Pig iron and blocks




Hs CodeDescription

US Hs Code - 7201 : Pig iron and spiegeleisen in pigs, blocks or other primary forms


720110Non-alloy pig iron in pigs, blocks or other primary forms, containing, by weight, <= 0,5% of phosphorous "ECSC"
720120Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight >= 0,5% phosphorus "ECSC"
720150Alloy pig iron and spiegeleisen, in pigs, blocks or other primary forms "ECSC"

US Hs Code - 7202 : Ferro-alloys


720211Ferro-manganese, containing by weight > 2% of carbon "ECSC"
720219Ferro-manganese, containing by weight <= 2% carbon
720221Ferro-silicon, containing by weight > 55% of silicon
720229Ferro-silicon, containing by weight <= 55% silicon
720230Ferro-silico-manganese
720241Ferro-chromium, containing by weight > 4% of carbon
720249Ferro-chromium, containing by weight <= 4% of carbon
720250Ferro-silico-chromium
720260Ferro-nickel
720270Ferro-molybdenum
720280Ferro-tungsten and ferro-silico-tungsten
720291Ferro-titanium and ferro-silico-titanium
720292Ferro-vanadium
720293Ferro-niobium
720299Ferro-alloys (excl. ferro-manganese, ferro-silicon, ferro-silico-manganese, ferro-chromium, ferro-silico-chromium, ferro-nickel, ferro-molybdenum, ferro-tungsten, ferro-silico-tungsten, ferro-titanium, ferro-silico-titanium, ferro-vanadium and ferro-niobium)

US Hs Code - 7203 : Ferrous products obtained by direct reduction of iron ore & other spongy ferrous products; iron, purity by weight<=9994%


720310Ferrous products obtained by direct reduction of iron ore, in lumps, pellets or similar forms "ECSC"
720390Spongy ferrous products, obtained from molten pig iron by atomization, iron of a purity of >= 99,94%, in lumps, pellets or similar forms "ECSC"

US Hs Code - 7204 : Ferrous waste & scrap; remelting scrap ingots of iron steel


720410Waste and scrap, of cast iron "ECSC" (excl. radioactive)
720421Waste and scrap of stainless steel "ECSC" (excl. radioactive, and waste and scrap of batteries and electric accumulators)
720429Waste and scrap of alloy steel "ECSC" (excl. stainless steel, and waste and scrap, radioactive, or waste and scrap from batteries and electric accumulators)
720430Waste and scrap of tinned iron or steel "ECSC" (excl. radioactive, and waste and scrap of batteries and electric accumulators)
720441Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings of iron or steel, whether or not in bundles "ECSC" (excl. those of cast iron, alloy steel or tinned iron or steel)
720449Waste and scrap of iron or steel "ECSC" (excl. slag, scale and other waste of the production of iron and steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen; waste and scrap of cast iron, alloy steel or tinned iron or steel; turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings; waste and scrap of primary cells, primary batteries and electric accumulators)
720450Remelting scrap ingots of iron or steel (excl. products whose chemical composition conforms to the definitions of pig iron, spiegeleisen, or ferro-alloys)

US Hs Code - 7205 : Granules & powders, of pig iron, spiegel, iron or steel


720510Granules, of pig iron, spiegeleisen, iron or steel (excl. granules of ferro-alloys, turnings and filings of iron or steel, certain small calibre items, defective balls for ball-bearings)
720521Powders, of alloy steel (excl. powders of ferro-alloys and radioactive iron powders "isotopes")
720529Powders, of pig iron, spiegeleisen, iron or non-alloy steel (excl. powders of ferro-alloys and radioactive iron powders "isotopes")

US Hs Code - 7206 : Iron & non-alloy steel in ingots or other primary forms ( excl iron of heading No 7203 )


720610Ingots, of iron and non-alloy steel, "ECSC" (excl. remelted scrap ingots, continuous cast products, iron of heading 7203)
720690Iron and non-alloy steel, in puddled bars or other primary forms "ECSC" (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203)

US Hs Code - 7207 : Semi-finished products of iron or non-alloy steel


720711Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of rectangular or square cross-section, the width measuring < twice the thickness
720712Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of square not rectangular cross-section, the width measuring >= twice the thickness
720719Semi-finished products of iron or non-alloy steel containing, by weight, < 0,25% of carbon, of circular cross-section, or of a cross-section other than rectangular or square
720720Semi-finished products of iron or non-alloy steel containing, by weight, >= 0,25% of carbon

US Hs Code - 7208 : Flat-rolled products of iron or non-alloy steel, width>=600 mm, hot-rolled, not clad, plated or coated


720810Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process "ECSC"
720825Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in relief "ECSC"
720826Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in relief "ECSC"
720827Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, pickled, without patterns in relief "ECSC"
720836Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm, not pickled, without patterns in relief "ECSC"
720837Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but < 10 mm, not pickled, without patterns in relief "ECSC"
720838Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, not pickled, without patterns in relief "ECSC"
720839Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, not pickled, without patterns in relief "ECSC"
720840Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process "ECSC"
720851Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm, without patterns in relief "ECSC"
720852Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, without patterns in relief "ECSC"
720853Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm, without patterns in relief "ECSC"
720854Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of < 3 mm, without patterns in relief "ECSC"
720890Flat-rolled products of iron or steel, of a width >= 600 mm, hot- rolled and further worked, but not clad, plated or coated

US Hs Code - 7209 : Flat-rolled products of iron or non-alloy steel, width>=600mm, cold-rolled, not clad, plated or coated


720915Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mm "ECSC"
720916Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of > 1 mm but < 3 mm "ECSC"
720917Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm "ECSC"
720918Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of < 0,5 mm "ECSC"
720925Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mm "ECSC"
720926Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of > 1 mm but < 3 mm "ECSC"
720927Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 0,5 mm but <= 1 mm "ECSC"
720928Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of < 0,5 mm "ECSC"
720990Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coated

US Hs Code - 7210 : Flat-rolled products of iron or non-alloy steel, width>=600 mm, clad, plated or coated


721011Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of >= 0,5 mm
721012Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of < 0,5 mm
721020Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with lead, incl. terne-plate
721030Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc
721041Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, tinned (excl. electrolytically plated or coated with zinc)
721049Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", not corrugated, tinned (excl. electrolytically plated or coated with zinc)
721050Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with chromium oxides or with chromium and chromium oxides
721061Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with aluminium-zinc alloys
721069Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with aluminium (excl. products plated or coated with aluminium-zinc alloys)
721070Flat products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or coated with plastics
721090Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated (excl. tinned, plated or coated with lead, zinc, chromium oxides, chromium and chromium oxides, or aluminium, painted, varnished or coated with plastics)

US Hs Code - 7211 : Flat-rolled products of iron or non-alloy steel, width<600 mm, not clad, plated or coated


721113Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" "ECSC"
721114Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 4,75 mm "ECSC" (excl. "wide flats")
721119Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm "ECSC" (excl. "wide flats")
721123Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbon
721129Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon
721190Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated

US Hs Code - 7212 : Flat-rolled products of iron or non-alloy steel, width<600 mm, clad, plated or coated


721210Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned
721220Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc
721230Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned (excl. electrolytically plated or coated with zinc)
721240Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or coated with plastics
721250Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated (excl. tinned, plated or coated with zinc, painted, varnished or coated with plastics)
721260Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad

US Hs Code - 7213 : Bars & rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel


721310Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process "ECSC"
721320Bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel "ECSC" (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process)
721391Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring < 14 mm in diameter "ECSC" (excl. bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process)
721399Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel "ECSC" (excl. products of circular cross-section measuring < 14 mm in diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process)

US Hs Code - 7214 : Other bars & rods of iron or non-alloy steel, forged, hot-rolled, hot-drawn or hot-extruded, incl twisted after rolling


721410Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils)
721420Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling process "ECSC"
721430Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded "ECSC" (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling)
721491Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "ECSC" (excl. square) cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel)
721499Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded "ECSC" (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel)

US Hs Code - 7215 : Other bars and rods of iron or non-alloy steel


721510Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished
721550Bars and rods, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. of free-cutting steel)
721590Bars or rods, of iron or non-alloy steel, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s.

US Hs Code - 7216 : Angles, shapes & sections of iron or non-alloy steel


721610U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm "ECSC"
721621L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm "ECSC"
721622T sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm "ECSC"
721631U sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm "ECSC"
721632I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm "ECSC"
721633H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm "ECSC"
721640L sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm "ECSC"
721650Sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded "ECSC" (excl. U, I, H, L or T sections)
721661Angles, shapes and sections, of iron or non-alloy steel, from flat-rolled products simply cold-formed or cold-finished (excl. profiled sheet)
721669Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet)
721691Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished from flat-rolled products and further worked (excl. profiled sheet)
721699Angles, shapes and sections, of iron or non-alloy steel, cold-formed or cold-finished and further worked (excl. from flat-rolled products), or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.

US Hs Code - 7217 : Wire of iron or non-alloy steel


721710Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods)
721720Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods)
721730Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods)
721790Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods)

US Hs Code - 7218 : Stainless steel in ingots or other primary forms; semi-finished products of stainless steel


721810Steel, stainless, in ingots and other primary forms "ECSC" (excl. waste and scrap in ingot form, and products obtained by continuous casting)
721891Semi-finished products of stainless steel, of rectangular (other than square) cross-section
721899Semi-finished products of stainless steel (excl. of rectangular [other than square] cross-section)

US Hs Code - 7219 : Flat-rolled products of stainless steel, width>=600mm


721911Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm "ECSC"
721912Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm "ECSC"
721913Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm "ECSC"
721914Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm "ECSC"
721921Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm "ECSC"
721922Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm "ECSC"
721923Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm "ECSC"
721924Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm "ECSC"
721931Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm "ECSC"
721932Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm "ECSC"
721933Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm "ECSC"
721934Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm "ECSC"
721935Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm "ECSC"
721990Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked

US Hs Code - 7220 : Flat-rolled products of stainless steel, width<600mm


722011Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm "ECSC"
722012Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm "ECSC"
722020Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced"
722090Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked

US Hs Code - 7221 : Bars & rods, hot-rolled, in irregularly wound coils, of stainless steel


722100Bars and rods of stainless steel, hot-rolled, in irregularly wound coils "ECSC"

US Hs Code - 7222 : Other bars & rods of stainless steel; angles, shapes & sections of stainless steel


722211Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section "ECSC"
722219Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded "ECSC" (excl. of circular cross-section)
722220Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished
722230Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.
722240Angles, shapes and sections of stainless steel, n.e.s.

US Hs Code - 7223 : Wire of stainless steel


722300Wire of stainless steel, in coils (excl. bars and rods)

US Hs Code - 7224 : Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel


722410Steel, alloy, other than stainless, in ingots or other primary forms "ECSC" (excl. waste and scrap in ingot form, and products obtained by continuous casting)
722490Semi-finished products of alloy steel other than stainless

US Hs Code - 7225 : Flat-rolled products of other alloy steel, width>=600mm


722511Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented "ECSC"
722519Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, non-grain-oriented "ECSC"
722520Flat-rolled products of high-speed steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced"
722530Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils, "ECSC" (excl. products of high-speed steel or silicon-electrical steel)
722540Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, "ECSC" (excl. products of high-speed steel or silicon-electrical steel)
722550Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled "ECSC" (excl. products of high-speed steel or silicon-electrical steel)
722591Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of high-speed steel or silicon-electrical steel)
722592Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of high-speed steel or silicon-electrical steel)
722599Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of high-speed steel or silicon-electrical steel)

US Hs Code - 7226 : Flat-rolled products of other alloy steel, width<600mm


722611Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-oriented
722619Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not grain-oriented
722620Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced"
722691Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled "ECSC" (excl. products of high-speed steel or silicon-electrical steel)
722692Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" "ECSC" (excl. products of high-speed steel or silicon-electrical steel)
722693Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of high-speed steel or silicon-electrical steel)
722694Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated, and products of high-speed steel or silicon-electrical steel)
722699Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc, and products of high-speed steel or silicon-electrical steel)

US Hs Code - 7227 : Bars & rods, hot-rolled, in irregularly wound coils, of other alloy steel


722710Bars and rods of high-speed steel, hot-rolled, in irregularly wound coils "ECSC"
722720Bars and rods of silico-manganese steel, hot-rolled, in irregularly wound coils "ECSC"
722790Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coils "ECSC" (excl. products of high-speed steel or silicon-electrical steel)

US Hs Code - 7228 : Other bars & rods of other alloy steel; angles, shapes & sections, of other alloy steel; hollow drill


722810Bars and rods of high-speed steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
722820Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
722830Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded "ECSC" (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
722840Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
722850Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
722860Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
722870Angles, shapes and sections of alloy steel other than stainless, n.e.s.
722880Hollow drill bars and rods, of alloy or non-alloy steel

US Hs Code - 7229 : Wire of other alloy steel


722910Wire of high-speed steel, in coils (excl. bars and rods)
722920Wire of silico-manganese steel, in coils (excl. bars and rods)
722990Wire of alloy steel other than stainless, in coils (excl. bars and rods and wire of high-speed steel or of silico-manganese steel)



Enquiry Form

Fields marked with an asterisk * are required.

 




What is New?

Date: 25-11-2014
Central Excise INSTRUCTION
Regarding procedure of service tax refund/exemption to SEZ

Date: 25-11-2014
RBI/2014-15/316 A.P. (DIR Series) Circular No. 41
Routing of funds raised abroad to India

Date: 21-11-2014
RBI/2014-15/309 A.P. (DIR Series) Circular No. 39
External Commercial Borrowings (ECB) Policy – Parking of ECB proceeds

Date: 21-11-2014
RBI/2014-15/310 A.P. (DIR Series) Circular No.40
Release of Foreign Exchange for Haj/ Umrah pilgrimage

Date: 21-11-2014
Customs Notification No. 32/ 2014
Seeks to exempt from customs duty goods required for the Intensified Malaria Control Project funded by GFATM.

Date: 21-11-2014
Customs Notification No. 44/2014-Customs (ADD)
Seeks to levy definitive anti-dumping duty on imports of diclofenac sodium, originating in or exported from People's Republic of China, for a period of five years.

Date: 21-11-2014
Customs Notification No. 45/2014-Customs (ADD)
Seeks to levy definitive anti-dumping duty on imports of Digital Versatile Discs-Recordable (DVD-R and DVD-RW), originating in or exported from People's Republic of China, Hong Kong and Chinese Taipei for a period of five years.

Date: 21-11-2014
Central Excise Notification No 23/2014
Seeks to exempt from excise duty goods required for the Intensified Malaria Control Project funded by GFATM.

Date: 20-11-2014
DGFT Public Notice No.75/(RE 2013)/2009-14
Modification of SION A-1475 and SIONs A-1839, A-1841 and A-1842.

Date: 20-11-2014
Customs Notification No 111/2014 (NT)
Rate of exchange of conversion of each of the foreign currency with effect from 21st November, 2014