Wait...
Search Global Export Import Trade Data
Recent Searches: No Recent Searches

Notes


Product Group Notes (I-O Norms)


GENERAL NOTE FOR CHEMICALS & ALLIED PRODUCTS
(PRODUCT CODE : A)



  1.  In case of formulation products, where norms are fixed based on a specific strength, assay/ percentage composition/ pack size/concentration/ active material etc., of the resultant product, the requirements of inputs for different strength/ pack size/ assay/formulation such as EC/ WDP/ WP etc. can be worked out on pro-rata basis.


  2.  Unless otherwise specifically mentioned, the quantity of inputs allowed are based on 100% strength/ concentration. In case the strength/
    concentration/ purity of the item imported/ proposed to be imported is different from what is mentioned alongwith the description of import
    item/ 100% strength etc., quantity of the item may be reduced or enhanced based on actual concentration of the imported inputs in the
    inverse ratio, i.e., more the concentration, the lesser the requirement and vice-versa.


  3.  In case where the input(s) required for the manufacture of the resultant export product have norms from further basic stages(s) for
    manufacture of one or more of such inputs, the licence can be issued by using these norms (excluding packing material, if any) in place of such
    inputs, for manufacture of the resultant export product.


  4.  In respect of Drug items, export products have been described with/without suffix such as IP, BP, USP. While issuing licences, suffix as
    such IP, BP, USP, depending upon the suffix used in the export order,may be added along with the description of the export product.


  5.  In respect of injection/ syrup, in addition to items permitted in the norms, the relevant glass vials with 5% wastage and stopper with 1%
    wastage, wherever required, can be allowed. Against export of capsules, relevant hard gelatin capsule may be allowed with 5% wastage on the net
    number of capsules in the export product.


  6.  In case of Drug Formulations like Injection/ Syrups, the export product description should be clearly defined to show the actual
    contents of bulk drugs in the export product as per drug manufacturing licence.


  7.  Wherever import of MDPE is allowed, the same would mean Plastic Granules with density ranging between 0.917 and 0.943.


  8.  Unless otherwise specifically mentioned, the input-output norms of Dye-stuffs are on the basis of 100% Assay/ 100% Dye content. In case the
    Assay/ Dye content is different or the resultant product to be exported is different from the Assay/ Dye content based on which the norms are
    fixed, the requirement of different raw materials may be calculated on pro-rata basis excluding the dispersing agent. The quantity of
    dispersing agent - Lignine Sulphonate or any other dispersing agent - to be used as per the declaration of the applicant would be 100 minus Assay
    percentage/ Dye content percentage of dye in the export product. In case of all finished dye, the percentage of dye content (Assay) in the export
    product description must be indicated.


  9.  Wherever import of "Caustic Soda" or "Caustic Soda Solid" or "Caustic Soda Flake" is allowed, it is on the basis of 100% strength.
    Wherever specific strength of Caustic Soda in Caustic Soda Lye is not mentioned, the same may also be taken as 100% strength, even though
    Caustic Soda is also commonly available in 50% and 33% Strength in Lye form. Interchangeability between the import of Caustic Soda Solid/
    Flakes or Caustic Soda Lye is permitted based on the percentage content of Caustic Soda in the import material. Further, wherever import of
    Caustic Soda or Caustic Soda Flakes is allowed, against specific norms, the same would also cover Caustic Soda Prills/ Pearls.


  10.  In case of paper, a variation of ±10% in GSM of paper in import and export will be allowed, except in case of SION at Sl.Nos.A-1569 and
    A-1579 where flexibility for import of relevant paper within the range of GSM 50 to GSM 150 will be allowed.


  11.  Where "Synthetic Rubber" has been permitted as an input in generic terms, the applicant will have to indicate the specific type of
    synthetic rubber to be used in the export product and same will also be indicated alongwith the export product.


  12.  In case of Plywood, wherever import of chemicals have been allowed,the value of the same shall not exceed 20% of FOB value of export. In
    case of Veneer, the value of such chemicals shall be limited to 5% of FOB value of exports.


  13.  Import of the following varieties of Wood or Veneer shall not be allowed against export of Commercial Plywood:

    1. Teak

    2. Rosewood

    3. Ash

    4. Cherry

    5. 5)White Oak

    6. Red Oak

    7. Walnut

    8. Birds Eye Maple

    9. Maple

    10. Burls of different varieties

    11. Reconstituted Veneers of different varieties

    12. Beeck

    13. Lace Wopod

    14. Sapelli

    15. Mahogany

    16. Afromosia and

    17. Other varieties of Peeled/ Sliced Decorative Veneers.



    The thickness of permissible Veneers other than those mentioned above should be maximum 6 mm.

  14.  In case of export of refrigerant gases in returnable ISO container, item of import required for manufacture of such gases shall only be
    allowed. Import and export of ISO container on lease basis shall be governed by rules and regulations laid down by Customs in this behalf.


  15. Wherever, import of Penicillin and its salts (ITC HS Code No. 29411010) or import of 6-APA (ITC HS Code No. 29411050) is allowed as an
    input item under Duty Exemption Scheme, the export obligation period for such licences shall be restricted to six months from the date of
    clearance of first import consignment. The licensing authority shall make an endorsement in the Advance Licence to this effect. No further
    extension in export obligation period shall be allowed in these licences.




 

Get Sample Now

Which service(s) are you interested in?
 Export Data
 Import Data
 Both
 Buyers
 Suppliers
 Both
OR
 Exim Help
+


What is New?

Date: 08-10-2024
NOTIFICATION No. 06/2024-Integrated Tax (Rate)
Seeks to amend Notification No. 4/2017- Integrated Tax (Rate) dated 28.06.2017.

Date: 08-10-2024
Notification No. 05/2024- Union Territory Tax (Rate)
Seeks to amend Notification No. 1/2017- Union Territory Tax (Rate) dated 28.06.2017.

Date: 08-10-2024
Notification No. 05/2024-Central Tax (Rate)
Seeks to amend Notification No. 1/2017- Central Tax (Rate) dated 28.06.2017.

Date: 08-10-2024
NOTIFICATION No. 06/2024-Central Tax (Rate)
Seeks to amend Notification No. 4/2017- Central Tax (Rate) dated 28.06.2017..

Date: 08-10-2024
Notification No. 05/2024- Integrated Tax (Rate)
Seeks to amend Notification No. 1/2017- Integrated Tax (Rate) dated 28.06.2017.

Date: 08-10-2024
NOTIFICATION No. 06/2024-Union Territory Tax (Rate)
Seeks to amend Notification No. 4/2017- Union Territory Tax (Rate) dated 28.06.2017.

Date: 07-10-2024
[Notification No. 65/ 2024-Customs (N.T.)]
Appointment of Common Adjudicating Authority i.r.o M/s. Penta Gold Limited.

Date: 01-10-2024
Notification No. 18/2024 – Central Tax
Seeks to notify Principal Bench of GST Appellate Tribunal to hear cases of anti-profiteering

Date: 01-10-2024
Notification No. 19/2024 – Central Tax
Notification under Section 171 of CGST Act to provide for the sunset date.

Date: 30-09-2024
Notification No. 64/2024-CUSTOMS (N.T.)
Fixation of Tariff Value of Edible Oils, Brass Scrap, Areca Nut, Gold and Silver- Reg



Exim Guru Copyright © 1999-2024 Exim Guru. All Rights Reserved.
The information presented on the site is believed to be accurate. However, InfodriveIndia takes no legal responsibilities for the validity of the information.
Please read our Terms of Use and Privacy Policy before you use this Export Import Data Directory.

EximGuru.com

C/o InfodriveIndia Pvt Ltd
F-19, Pocket F, Okhla Phase-I
Okhla Industrial Area
New Delhi - 110020, India
Phone : 011 - 40703001