PLASTICS (PRODUCT CODE : H)
FORMULA FOR NORMS AT SL. NO. H-404
The composite weight in Gms per
Sq.Mtr. (GSM) of the export product is to be calculated as A+B+C+D+E+F where:
A = Weight in Gms per Sq. Mtr.
(GSM) of relevant film used as 1st layer as at Sr.No.1, which
is to be determined as follow:
Specific gravity of the film X
thickness (Micron) = GSM/ Sq. Mtr.
B = Weight in Gms per Sq. Mtr.
(GSM) of relevant film used as 2nd
layer as at Sr.No.1, which
is to be determined as follow:
Specific gravity of the film X
thickness (Micron) = GSM/ Sq. Mtr.
C = The weight of ink at Sl.No.2
on dry weight basis shall be taken as 2.5 Gms/ Sq. Mtr. on
an average having total solid content
of 25% ± 3%.
D = The weight of adhesive at
Sl.No.3 on dry weight basis shall be taken as 2.5 Gms/ Sq. Mtr.
on an average having total solid content
of 60% ± 5%.
E = The weight of additive at
Sl.No.4 on dry weight basis shall be taken as 0.20 Gms/ Sq. Mtr.
on an average having total solid content
of 50% ± 5%.
F = The weight of relevant hotmelt
in gms per Sq. Mtr.
The above is for two layer printed
flexible packaging material/ laminate.
In case of single layer flexible packaging material in the export
product items at 'B', 'D', 'E' shall be excluded.
A+B+C+D+E+F GMS = Weight of 1
Sq.Mtr. of export product.
Therefore,
1 Kg. of export item =
1000 ___
Sq. Mtr. of export product.
A+B+C+D+E+F
Entitlement of raw material as
at S.No. 1-5 = i)
Net content of A in the export product
for 1 kg. of export product shall be
determined as follow:
1000 __
= M kg.
A+B+C+D+E+F
Therefore entitlement of input A =
M kg X (100 + wastage %) =
______ kg.
100
ii) Net
content of B in the export product
shall be determined as
follow:
B ___ = P kg.
A+B+C+D+E+F
Therefore entitlement of input B =
P kg X (100 + wastage %) =
______ kg.
100
iii) Net
content of C in the export product
shall be determined as
follow:
2.5 ___
X 100 = Q kg.
A+B+C+D+E+F 25@
Therefore entitlement of input C =
Q kg X (100 + wastage %) =
______ kg.
100
iv) Net
content of D in the export product
shall be determined
as follow:
2.5 ___
X 100 = R kg.
A+B+C+D+E+F 60@
Therefore entitlement of input D =
R kg X (100 + wastage %) =
______ kg.
100
v) Net content of E in the export product
shall be determined
as follow:
0.2 ___
X 100 = S kg.
A+B+C+D+E+F 50@
Therefore entitlement of input E =
S kg X (100 + wastage %) =
______ kg.
100
vi) Net
content of F in the export product
shall be determined
as follow:
F ___ = T kg.
A+B+C+D+E+F
Therefore entitlement of input F =
T kg X (100 + wastage %) =
______ kg.
100
@ This represents total solid of
the respective inputs at Sl.No.2, 3 & 4.
PLASTICS PRODUCT
GENERAL NOTES FOR PLASTICS PRODCUTS
(PRODUCT CODE: H)
1. In case where the input (s) required
for the manufacture of the resultant export product have norms from further
basic stage (s) for manufacture of one or more of such inputs, the licence can
be issued by using these norms (excluding packing material, if any) in place of
such inputs, for manufacture of the resultant export product.
NOTES FOR FORMULA
1.
Exporter shall declare type of flexible packaging
material i.e. adhesive laminated or extrusion laminated flexible material. In addition the exporter shall also declare
composition of export product indicating number of layers, thickness of each
film/ substrate in respect of the inputs as at Sl. No. 1 to be used in the
export product.
2.
FLEXIBLE PACKAGING MATERIAL/ LAMINATE CONTAINING
SINGLE LAYER OF INPUTS AT SR. NO. 1
In the
case of export of single layer printed flexible packaging material, import of
relevant inputs at Sl.No. 1 & 2 is allowed with wastage of 12% (twelve) and
10% (ten) respectively. Further, the
import of input at Sl.No. 5 is allowed with wastage of 10% (ten) if the product
is exported with hotmelt. (However,
import of inputs at Sl.No. 3 & 4 will not be allowed for said product).
3.
FLEXIBLE PACKAGING MATERIAL/ LAMINATE CONTAINING
SINGLE LAYER OF INPUTS AT SR. NO. 1
i)
In the case of export of two layer printed flexible
packaging material/ laminate the import of relevant inputs at Sl.No. 1, 2, 3,
& 4 is allowed with wastage of 15% (fifteen) and 10% (ten), 10% (ten) and
10% (ten) respectively. The import of input at Sl.No. 2 i.e. Liquid Printing
Ink will not, however, be allowed in the case of export of unprinted flexible
packaging material. Further, the import of input as at Sl.No. 5 is allowed with
wastage of 10% (ten) if the product is exported with hotmelt.
ii)
In the case of export of extrusion coated flexible
packaging material/ laminate the import of inputs as at Sr. No. 1(k) i.e. LDPE
granules will alone be allowed with wastage of 10% (ten). However, the import of items as at Sr. No. 3
& 4 will not be allowed.
4.
MULTILAYER FLEXIBLE PACKAGING MATERIAL/ LAMINATE CONTAINING MORE THAN
TWO LAYER OF INPUTS AT SR. NO. 1
i)
In the case of export of such product, the import of
relevant inputs at Sl.No. 1 is to be allowed with additional wastage of 3% for
each additional layer over and above wastage allowed in two layer flexible
packaging material/ laminate referred to in the note 3(i) above.
ii)
The quantity of inputs as mentioned at Sr. Nos. 3
& 4 i.e. Liquid Polyurethane Adhesive (0.4 gms/ Sq.Mtr. + wastage) and
Liquid Polyurethane Additive (0.80 gms/ Sq. Mtr. + wastage) are allowed for
import in the case of export of flexible packaging material/ laminate
containing two layers of inputs as at sr. No.1 and for each additional layer
the said quantity of the inputs would be permitted for import. However, in the case of export of extrusion
coated flexible packaging material/ laminate the import of inputs as at Sr. No.
1(k) above will be allowed for import with wastage of 10% (ten).
Weight of
Dry Adhesive and Additive taken at 'D' and 'E' in the formula above will be
added for each additional layer to arrive at composite weight in GSM per
Sq.Mtr. of the export product.
iii)
The quantity of input allowed as at Sr. No. 2 i.e.
Liquid Printing Ink will, however, remain unchanged irrespective of the
addition of number of layers.
iv)
The import of item at Sr. No. 5 i.e. relevant hotmelt
is allowed with wastage of 10% (ten) if the product is exported with hotmelt.
5.
EXPORT PRODUCT IN POUCH FORM
If the
resultant product is in pouch form, additional wastage as mentioned below is to
be allowed over and above the wastage allowed in case of single layer or two
layer or multiplayer flexible packaging material depending upon the specific
type of pouch to be exported.
POUCH TYPE WASTAGE
1. Centre Seal/ Side Seal 3% (three)
2. Standup/ Standup with re-closable zipper 5% (five)
3. Pouches with spouts 8% (eight)
For export
of HDPE spout fixed pouches 1.05 kg of HDPE Granules is allowed for 1 kg. of
HDPE content in the export product.
Exporter should also declare the specific type of pouch to be exported.
6.
The total solid content taken on an average basis for
liquid printing ink, liquid adhesive and liquid additive has been taken as 25%
± 3%, 60% ± 5% and 50% ± 5% respectively.
7.
Additional wastage of 5% (five) is allowed for
conversion of LLDPE Granules, LDPE Granules and HDPE Granules into Polyethene
Film.
8.
Exporter shall have the option to apply for import of
inputs; for making polyester film as per SION published in Foreign Trade Policy/ Procedure in lieu of import of
polyester films as such.
9.
If the manufacturing process involves extra step of
converting base plastic film (as at Sr. No.1) to holography film then the
import of relevant film used for holographic expression will be permitted with
additional wastage of 3% (three) over and above the entitlement for various
flexible laminates/ pouches.
10.
In case of unprinted material, ink is not to be
allowed and consequently weight of dry ink taken at 'C' in the formula is not
to be taken for calculation purposes.
11.
In case of export product without hotmelt, hotmelt is
not to be allowed and consequently weight of hotmelt taken as 'F' in the
formula is not to be taken for calculation purpose.
12.
Specific gravity of raw material to be used in the
export product are as under:
1. PET - 1.38
2. Metallised PET - 1.38
3. BOPP - 0.90
4. Metallised BOPP - 0.90
5. PVC - 1.28
6. Metallised PVC - 1.28
7. LDPE - 0.92
8. CPP - 0.90
9. Cellophane - 1.48
10. Pearlised BOPP - 0.62
11. Aluminium Foil - 2.7
12. Paper - GSM of paper
13. Metallised CPP - 0.90
14. PVC Heat Shrinkable Film - 1.28
15. BOPP Heat Sealable Film - 0.90
16. HDPE - 0.96
17. LLDPE - 0.92