Exemption to specified goods used by units in Free Trade Zones
Notification No. 126 dated 2nd September
1994 (As amended by Notifications No. 96 dated 26th May 1995,
Notification No. 112 dated 14th September 1995, Notification No. 5 dated
15th March 1996, Notification No. 21 dated 11th April
1997, Notification No. 23 dated 11th May 1999, Notification No. 25 dated
19th May 1999, Notification No. 2 dated 28th January 2000,
Notification No. 29/2001, Notification No. 52 Dated 6th
November 2001, Notification No. 35 dated 24th June 2002, Notification
No. 36 dated 25th June 2002)
In exercise of
the powers conferred by sub-section (1) of section 5A of the Central Excise Act,
1944 (1 of 1944), read with sub-section (3) of section 3 of the Additional
Duties of Excise (Goods of Special Importance) Act, 1957 (58 of 1957), the
Central Government being satisfied that it is necessary in the public interest
so to do, hereby exempts excisable goods, specified in Annexure I to this
notification (here-in after referred to as the said goods), when required for
the use by units (hereinafter referred to as the user industry ) located in any
Export Processing Zone, specified in Annexure II of this notification, being
free trade zone( hereinafter referred to as the zone), and brought by the user
industry from the factory of their manufacture or warehouse situated in other
parts of India, for use by such user industry -
(a) for the production or
manufacture of articles for export out of India; or
(b) for being used in connection with the production,
manufacture or packaging of articles for export out of India; or for export of
services out of India; or
(c) for carrying out processing of, or operations
(including repairs, re-conditioning and re-engineering) in relation to, the
articles intended for export out of India; or
(d) for promotion of such export,
from
the whole of,
(i)
the duty of excise leviable thereon under section 3 of the Central Excise
Act, 1944 (1 of 1944),
(ii) the additional duty of excise leviable
thereon under section 3 of the Additional Duties of Excise (Goods of Special
Importance) Act, 1957 (58 of 1957),
subject
to the following conditions, namely: -
(1)
the user industry has been authorised to establish a unit in the zone for
the purposes specified in clauses (a) to (d) above;
(2)
the user industry brings the excisable goods directly from the factory of
manufacture or warehouse;
(3) the entire excisable goods so brought are used by
the user industry in the zone for the purposes specified in clauses (a) to (d)
above;
(4) the user industry disposes of the said goods or the
articles produced, manufactured, processed or packaged in the unit in the zone
or the waste scrap and remnants arising out of such production, manufacture,
processing or packaging in the manner as provided in the Export-Import Policy
and in this notifications;
(5) the user industry executes a bond with the
Assistant Commissioner of the Central Excise or Deputy Commissioner of Central
Excise (hereinafter referred to as Assistant Commissioner of Central Excise or
Deputy Commissioner of Central
Excise) in the prescribed form and for such sum as may be specified by that
Assistant Commissioner of Central Excise or Deputy Commissioner of Central
Excise, for the proper accountal of the receipt, storage and utilisation of such
goods, to fulfil the export obligations and comply with the conditions
stipulated in this notification, and the Export and Import Policy and binding
itself to pay on demand an amount equal to the duty leviable on the goods and
interest at fifteen per cent per annum on the said duty from the date of duty free
procurement of the said goods till the date of payment of such duty, if -
(i) in the case of capital goods, such goods are
not proved to the satisfaction of the Assistant Commissioner or Deputy
Commissioner of Customs or Central Excise to have been installed or otherwise
used within the zone within a period of one year from the date of procurement
thereof or within such extended period not exceeding five years as the Assistant
Commissioner or Deputy Commissioner of Customs or Central Excise may, on being
satisfied that there is sufficient cause for not using them as above within the
said period, allow;
(ii) in the case of goods other than capital goods, such
goods are not proved to the satisfaction of the Assistant Commissioner or Deputy
Commissioner of Customs or Central Excise to have been used in connection with
the production or packaging of goods for export out of India or cleared for home
consumption within a period of one year from the date of procurement thereof or
within such extended period as the Assistant Commissioner or Deputy Commissioner
of Customs or Central Excise, may on being satisfied that there is sufficient
cause for not using them as above within the said period, allow;
(iii) in
the case of -
(a) goods produced or
packaged, such goods have not been exported out of India, and
(b) unused goods (including empty cones,
bobbins or containers, if any, suitable for repeated use) as have not been
exported or cleared for home consumption,
within a period
of one year from the date of procurement of such goods or within such extended
period as the Assistant Commissioner or Deputy Commissioner of Customs or
Central Excise may, on being satisfied that there is sufficient cause for not
using them as above within the said period, allow;
(iv) in the case of raw materials, components, spares
and consumables (other than capital goods) procured duty free, the unit fails to
achieve Net Foreign Exchange Earning as a Percentage of Exports (NFEP) and
Export Performance (EP) as specified in Appendix-I of the Export and Import
Policy, within one year of procurement of such goods or within such extended
period not exceeding one year as the Assistant Commissioner or Deputy
Commissioner of Customs or Central Excise may, on being satisfied that there is
sufficient cause, allow:
Provided that the Commissioner of Customs or
Central Excise may extend the period for achievement of Net Foreign Exchange as
a Percentage of Exports (NFEP) or Export Performance (EP) for further period,
not exceeding five years, from the date of procurement;
(6) the user industry satisfies the Development
Commissioner of the zone that the said goods have been used for the purposes
specified in clauses (a) to (d) or for any other purposes specified in the
Export-Import Policy and in this notification;
(7) the manufacturer of the said goods follows the
procedure contained in rules 11 and 20 of the Central Excise Rules, 2002;
(8) the user industry of the said goods follows the procedure contained
in contained in the Central Excise (Removal of Goods
at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 2001,
with the modification that a certificate in Form CT-3 annexed to this
notification as Annexure-III shall be used by the Central Excise officer in
charge of the user industry in place of an application in the Form at Annexure-I
provided in the said rules provided in the said rules.
2. The Assistant Commissioner of Central Excise
or Deputy Commissioner of Central Excise may, subject to such conditions and
limitations as may be imposed by him and subject to the provisions of the
Export-Import Policy, -
(a) permit the said goods or goods partially processed,
manufactured, produced or packaged in the unit to be taken outside the zone
without payment of duty, for repairs, processing, testing, display or job work
and to be returned to the unit thereafter or remove the same without payment of
duty under bond for export from jobwork�s
premises:
Provided that wastes or scrap or remnants
generated during such process at the jobworker�s premises is either returned
to the unit or is cleared on payment of duty on the said waste or scrap or
remnants as if cleared by the said unit;
(b) permit the said goods or goods manufactured,
produced, processed or packaged to be supplied or transferred from a unit in the
zone or another unit in the same zone for any of the purposes specified in clauses
(a) to (c) of paragraph 1.
Provided that clause (b) shall not apply to
said goods for repairs, reconditioning or re-engineering.
(c)
permit the goods manufactured or produced in the unit to be supplied or
transferred from a unit in the zone to a unit in another zone, special
economic zone, Software Technology Park, Electronics Hardware Technology Park
or a hundred per cent export oriented undertaking for the purposes specified
in clauses (a) to (c) of paragraph 1.
(d)
permit the capital goods to be supplied or transferred from a unit in the zone
to a unit in another zone, special economic zone, Software
Technology Park, Electronics Hardware Technology Park or a hundred per cent
export oriented undertaking the purpose of manufacture and export or for the
use within the unit.
3. Subject to the satisfaction of the Assistant
Commissioner of Central Excise or Deputy Commissioner of Central Excise, duty
shall not be leviable in respect of -
(a)
the said goods used for imparting training to workers of the user
industry;
(b) the said goods or goods manufactured, produced,
processed or packaged in the unit, if such goods are destroyed within the zone
in the presence of the Central Excise Officer;
(c) the scrap or waste materials or remnants arising in
the course of such production, manufacture, processing or packaging, if such
scrap or waste material or remnants are destroyed within the zone in the
presence of the Central Excise Officer.
Explanation: For
the purposes of this notification, �Export and Import Policy� means the
Export - Import Policy, 1 April, 2002 � 31st March, 2007, published
by the Government of India in the Ministry of Commerce and Industry vide Notification No.
1/2002 - 2007, dated 31st March, 2002, as amended from time to time.
4. Notwithstanding anything contained in
paragraph 1, in the case of user industry engaged in the development of computer
software, the exemption contained therein shall also apply to said goods
procured by such user industry for training, and for development and testing of
software for export and for providing consultancy services for development of
software �on site� abroad;
Provided that -
(a)
the conditions stipulated in this notification are complied with by such
software development unit; and
(b) the procedure specified by the
Assistant Commissioner of Central Excise or Deputy Commissioner of Central
Excise is followed.
Explanation: The
consultancy fees received by software development units in convertible foreign
currency, for consultancy service for development of software �on site�
abroad shall be deemed to be exports for the purposes of fulfilment of export
obligation under this notification.
5. Notwithstanding anything contained in this
notification, the exemption contained herein shall also apply to the said goods
used for the purposes of production, manufacture, processing or packaging of
articles in a unit in the zone and such articles (including rejects, waste,
scrap and remnants arising out of such production, manufacture, processing or
packaging of such articles) even if not exported out of India are allowed to be
cleared outside the zone under and in accordance with the Export - Import Policy
and subject to such other limitations and conditions as may be specified in this
behalf by the Development Commissioner of the zone, on payment of appropriate
duty of excise or where such articles are cleared to the warehouse appointed or
registered under Notification of the Government of India in the Ministry of
Finance, Department of Revenue number 26/98-Central Excise (NT), dated the 15th
July, 1998 or cleared to the licence holders referred to in clause (e) of
paragraph 6.9 of the Export and Import Policy, without payment of duty:
Provided that goods, which have been
repaired, reconditioned or re-engineered shall not be allowed to be cleared
outside the zone.
6. Without prejudice to other provisions
of this notification, where the Assistant Commissioner or Deputy Commissioner of
Central Excise is satisfied that the unit, which has been permitted by the
concerned State Electricity Board in this behalf, has been permitted by
Development Commissioner to sell into Domestic Tariff Area (DTA) or transfer to
other hundred per cent export oriented undertaking or units in Export Processing
Zone or Software Technology Park or Electronic Hardware Technology Park or
Special Economic Zone, the surplus power generated in its diesel generating sets
or captive power plant subject to fulfilment of such conditions as may be
specified by the Assistant Commissioner or Deputy Commissioner of Central Excise
on this behalf, the Assistant Commissioner or Deputy Commissioner of Central
Excise may allow the unit-
(i)
to sell such surplus power in Domestic Tariff Area on payment of an amount equal
to the duty leviable on consumables and raw materials but for the exemption of
duty thereon, used for generation of each unit of power so sold in the Domestic
Tariff Area on the basis of norms approved by the Board of Approvals appointed
by the notification of the Government of India in the Ministry of Commerce and
Industry, Department of Commerce No. 14/1/2001-EPZ dated 7th August,
2001;
(ii)
to transfer such surplus power to other hundred per cent export oriented
undertaking or unit in Export Processing Zone or Software Technology Park or
Electronic Hardware Technology Park or Special Economic Zone without payment of
duty:
Provided
that both supplying and receiving unit shall maintain account for the
quantity of consumables and raw materials used in generation of each unit of
power so transferred as quantified on the basis of norms approved by the said
Board of Approval, for the purpose of calculation of Net Foreign Exchange
earning as a Percentage of Export.
Explanation: The
depreciation in respect of goods covered by clause (a) shall be allowed for the
period from the date of commencement of the commercial production of the unit or
the date of receipt of the goods in the unit, whichever is later, till the date
of payment of duty.
7.
(1) The notifications of the Government of India in the
Ministry of Finance in the Department of Revenue and Insurance or Department of
Revenue, as the case may be, specified in Annexure IV to this notification are
hereby rescinded.
(2) Notwithstanding such rescission, anything done or
action taken under the notifications so rescinded shall be deemed to have been
done or taken under the corresponding provisions of this notification.
ANNEXURE I (See
paragraph 1)
Sl. No.
|
Description of
Goods
|
1.
|
Capital goods and
spares thereof.
|
2.
|
Material handling
equipments, namely, fork lifts, over-head cranes, mobile cranes, crawler cranes,
hoists and stackers and spares thereof.
|
2A.
|
Uninterrupted power supply (UPS), pollution
control equipment, quality assurance equipment, storage systems, special racks
for storage, modular furniture, computer furniture, antistatic carpet,
tele-conference equipment, servo control system, security systems, panels for
electricals and air-conditioning system.
|
2B.
|
Spares and consumable for the goods specified at
Serial Number 2A above.
|
3.
|
Captive Powers Plant including Captive Generating Set and Transformer as recommended by the Development
Commissioner.
|
3A.
|
Spares, fuel, lubricants, consumables and
accessories for captive power plants including captive generating set and
spares, consumables and assessors for transformers as approved by the Assistant
Commissioners of Customs or Deputy Commissioner of Customs.
|
4.
|
Office equipment including PABX, fax machines,
video projection system,computer, laptop, server,spares and consumables thereof.
|
5.
|
Raw materials.
|
6.
|
Components.
|
7.
|
Consumables.
|
8.
|
Packaging
materials.
|
9.
|
Tools, jigs,
gauges, fixtures, moulds, dies, instruments and accessories and spares thereof.
|
10.
|
A prototype or a technical sample for each of the
existing products for the purpose of product diversification, development or
evaluation.
|
11.
|
Drawings, blue
prints and charts.
|
12.
|
Furnace Oil required for boiler as approved by
the Assistant Commissioner of Customs or Deputy Commissioner of Customs.
|
13.
|
Raw materials for making capital goods for use
within the unit for the purpose of production or manufacture of export goods.
|
14.
|
Any other item required in relation to production of
export goods with the prior approval of Board of Approval.
|
ANNEXURE II (See
paragraph 1): Name of the Zone
1.
Omitted.
2.
Omitted.
3.
Falta Export Processing Zone.
4.
Madras Export Processing Zone.
5.
NOIDA Export Processing Zone.
6.
Omitted.
7.
Vishakapatnam Export Processing Zone.
8.
Omitted.
Explanation: For
the purposes of this notification, -
(a) the �Santa Cruz
Electronics Export Processing Zone� shall comprise of the places specified in
clause (xiva) of rule 2 of the said rules;
(b) the �Kandla Free Trade
Zone� shall comprise of the places bearing survey numbers and enclosed by the
boundaries specified in clause (viia) of rule 2 of the said rules;
(c) the �Falta Export
Processing Zone� and the �Madras Export Processing Zone� shall comprise of
places bearing the survey number and enclosed by boundaries specified in the
notification of the Government of India in the Ministry of Finance (Department
of Revenue) No. 236/ 85- Central Excises, dated the 15th November,
1985;
(d) the �NOIDA Export
Processing Zone� shall comprise of the places bearing the khasra numbers or
survey numbers, as the case may be, and enclosed by the boundaries specified in
the notification of the Government of India in the Ministry of Finance
(Department of Revenue) No. 4/ 86- Central Excises, dated the 20th
January, 1986;
(e) the �Cochin Export
Processing Zone� shall comprise of the places bearing the survey numbers,
location, area and enclosed by the boundaries specified in the notification of
the Government of India in the Ministry of Finance (Department of Revenue) No.
397/ 86- Central Excises, dated the 26th August, 1986;
(f) the �Vishakapatnam
Export Processing Zone� shall comprise of the places bearing the khasra
numbers or survey numbers, as the case may be, and enclosed by the boundaries
specified in the notification of the Government of India in the Ministry of
Finance (Department of Revenue) No. 38/ 94- Central Excises(N.T.), dated the 2nd September, 1994;
(g) the �Surat Export Processing
Zone� shall comprise of the places bearing the block numbers, location, area
and enclosed by the boundaries specified in the notification of the Government
of India in the Ministry of Finance (Department of Revenue) No. 7/ 96- Central
Excises(N.T.), dated the 15th March, 1996.
ANNEXURE III (See
paragraph 1)
No. ____________
Date ___________
FORM CT 3:
CERTIFICATE FOR REMOVAL OF WAREHOUSED GOODS UNDER BOND
This is to
certify that:
(1) Mr./ Messrs
____________________________________________________________ (Name and address)
is/ are bonafide licensee holding licence no. __________ valid upto
_________________________.
(2) That he/ they has/ have executed a bond in Form
B-16 (General Surety/ General Security) No. _____________________ date
_____________ for Rs. _____________________ with the Assistant Commissioner of
Central Excise or Deputy Commissioner of Central Excise __________ and as such may be permitted
to remove ________ (quantity) of _____________ (excisable goods) from the unit
at ______________ to their undertaking _______________________________ at
_________.
(3) That the specimen signature(s)
of his/ their agent namely Shri ________________________ are furnished here
below duly attested:
Specimen
Signatures of owner or his authorised agent _____________________ Central Excise Officer
________________
Sd/- Attested Officer-in-charge of the unit in Export Processing Zone
ANNEXURE IV
1. Notification
No. 186/75 �C.E., dated the 21st August 1975
2. Notification
No. 272/79 �C.E., dated the 18th October 1979
3. Notification
No. 237/85 �C.E., dated the 15th November 1985
4. Notification
No. 238/85 �C.E., dated the 15th November 1985
5. Notification
No. 5/86 �C.E., dated the 20th January 1986
6. Notification
No. 398/86 �C.E., dated the 26th August 1986
|