Notification
No. 95 dated 2nd March 1993 (As amended by notification nos. 189/93,
110/94, 192/94, 83/95, 101/95, 117/95, 171/95, 86/96, 12/98, 38/98, 65/99,
9/00, 71/2000, 56/2001, Notification No. 64 dated 24th June 2002, Notification
No. 65 dated 25th June 2002)
In exercise of the powers conferred by
sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the
Central Government, being satisfied that it is necessary in the public interest
so to do, hereby exempts goods specified in the Table below (hereinafter
referred to as the �goods�) when imported into India or procured from a Public
Warehouse or a Private Warehouse appointed or licensed, as the case may be,
under section 57 or section 58 of the said Customs Act, or procured from
international exhibitions held in India for the purposes of manufacture and
development of electronics hardware, or electronics hardware and software in an
integrated manner, by units in the Electronics Hardware Technology Park Complex
under the 100 percent export oriented scheme, approved in this behalf by the
Inter-Ministerial Standing Committee (hereinafter referred to as the
�Committee�) appointed by notification of the Government of India in the
Department of Industrial Development S.O. No.117 (E) dated the 22nd
February, 1993 (as amended ) from the whole of the duty of customs leviable
thereon under the First Schedule to the Customs Tariff Act, 1975 (51 of 1975)
and the additional duty, if any, leviable thereon under section 3 of the second
mentioned Act, subject to the following conditions, namely: -
(1)����� The importer has been granted necessary approval by the
Committee, for the import of goods for the said purposes;
(2)��� The importer carries out the manufacture or
development or both of the electronics hardware or software under customs bond
and subject to such other conditions, as may be specified by the Assistant
Commissioner of Customs in this behalf;
(3)��� The
importer exports out of India hundred percent, or such other percentage, as may
be fixed by the committee, of electronics hardware or software manufactured
wholly or partly from the goods for the period stipulated by the Committee or
such extended period as may be specified by the Committee;
������� Provided
that all such
exports are made against freely convertible foreign currency;
(4)����� Omitted
(5)����� The importer agrees-
(a)��� to bring the goods into the unit and use
them within the unit in connection with the manufacture or development or both
of electronics hardware or software for export:
(b)�� not to move the goods from the unit without the approval of the
Assistant Commissioner of Customs:
(c)�� to export out of India all electronics hardware or software
manufactured in the unit;
(6)��� The importer shall produce a certificate to
the Assistant Commissioner of Customs from the designated officer to the effect
that the goods imported are to be installed or used in the unit and that the
import of such goods has been authorised by the Committee;
(7)��� Without prejudice of any other provisions
contained in this notification, the Assistant Commissioner of Customs may,
subject to such conditions and limitations as he may deem fit to impose under
the circumstances of the case for the proper safeguard of the revenue interest
and also subject to such permission of the Designated officer or the Committee
where it is exclusively required under the Export and Import Policy, allow the
said unit to clear any of the said goods for being taken to any other place in
India in accordance with the Export and Import Policy -
(a)��� such clearance of capital goods, material
handling equipments, office equipments and captive power plants may be allowed
on payment of an amount equal to the customs duty leviable on such goods on the
depreciated value thereof� and at the
rate in force on the date of payment of such duty;
(b)��� such clearance of goods (including
containers, suitable for repeated use) other than those specified in clause (a)
may be allowed on payment of customs duty on the value at the time of import
and at rates in force on the date of payment of such customs duty;
(c)��� such
clearance of used packing materials such as cardboard boxes, polyethylene bags
of a kind unsuitable for repeated use may be allowed without payment of any
customs duty;
Provided that the importer shall not be
eligible to avail of the exemption applicable to goods falling under heading
No.98.01 of the First Schedule to the Customs Tariff Act, 1975 (51of 1975), or
the exemption available to the imported goods under any Export Promotion scheme
other than the Export Promotion Capital goods Scheme permitting import of
capital goods at the rate of duty of 5% ad valorem in terms of
notifications in force at the time of debonding.
Explanation: The depreciation in
respect of goods covered by clause (a) shall be allowed for the period from the
date of commencement of commercial production of the unit or where such goods
have been imported after such commencement from the date such goods have come
into use for commercial production upto the date of payment of duty.
(8)��� The importer executes a bond in such form
and for such sum and with such authority, as may be prescribed by the Assistant
Commissioner of customs, binding himself to fulfil the export obligations and
conditions under this notification, conditions under the Export and Import
Policy and to pay on demand an amount equal to duty leviable on the goods and
interest at the rate of fifteen percent per annum on the said duty from the
date of duty free importation or procurement of the said goods till the date of
payment of such duty, if -
(i)���� in the case of capital goods, such goods
are not proved to the satisfaction of the Assistant Commissioner of Customs to
have been installed or otherwise used within the bonded premises or re-exported
within� a period of one year from the
date of importation or procurement thereof�
or within such extended period not exceeding five years as the Assistant
Commissioner of Customs may, on being satisfied that there is sufficient cause
for not using them as above within the said period, allow;
(ii)��� in the case of goods other than capital
goods, such goods are not proved to the satisfaction of the Assistant
Commissioner of customs to have been used in connection with the production or
packaging of goods for export out of India or re-exported within a period of
one year from the date of importation or procurement thereof or within such extended
period as the Assistant Commissioner of Customs may, on being satisfied that
there is sufficient cause for not using them as above within the said period,
allow;
(iii)� in the case of -
(a)��������� goods produced or packaged, such goods have not been exported
out of India, and-
(b)��� unused goods (including containers, suitable
for repeated use) as have not been exported, within a period of
one year from the date of importation or procurement of such goods or within
such extended period as the Assistant Commissioner of Customs may, on being
satisfied that there is sufficient cause for not exporting such goods within
the said period, allow;
(iv)��� in the case of raw materials, components, spares
and consumables (other than capital goods) imported or procured duty free, the
unit fails to� achieve Net Foreign
Exchange Earnings as a Percentage of Exports (NFEP) and Export performance (EP)
as specified in Appendix�1 of the� said
Export and Import Policy, within one year of importation or procurement of such
goods or within such extended period, not exceeding one year, as the Assistant
Commissioner of Customs may, on being satisfied that there is sufficient cause,
allow:
Provided that the Commissioner of Customs may
extend the period for achievement of Net Foreign Exchange as a percentage of
Exports (NFEP) or Export Performances (EP) for further period not exceeding
five years from the date of importation or procurement.
(9)����� Omitted
(10)��� The procedure, as may be prescribed by the Commissioner of
Customs, is followed by such unit;
(11)� The
Assistant Commissioner of Customs may, subject to such conditions and
limitations as may be stipulated in the Export and Import Policy and those as
may be specified by him in this behalf permit the goods imported or produced by
the unit or goods partially processed or manufactured or packaged therefrom to
be taken outside the unit without payment of duty for the purposes of test,
repairs, refining, processing, display, jobwork or any other process necessary
for manufacture of final products and to be returned to the said unit
thereafter or remove the same without payment of duty� under bond for export from the job worker�s premises:
Provided that the waste or scrap or remnants
generated during such processes at the job worker�s premises is either returned
to the unit or is cleared on payment of duty as if the said waste or scrap or
remnants have been cleared by the said unit;
(11A)�� The Assistant Commissioner of Customs may
permit to remove moulds, jigs, tools, fixtures, tackles, instruments, hangers and
patterns and drawings to the premises of sub-contractors subject to the
condition that these goods shall be brought back to the bonded premises of
Export Oriented Unit in the Electronics Hardware Technology Park complex on
completion of the job work, within a stipulated period;
(12)� Captive power plants including captive
generating sets of a capacity exceeding 1000 KVA and the spares, fuel,
lubricants another consumables for such plants and sets as recommended by the
Committee.
(12A)�� Captive power plants including captive generating sets upto 1000
KVA capacity and the spares, fuel, lubricants and other consumables for such
plants and sets as recommended by the designated officer.
(13)� The Assistant Commissioner of Customs may, subject to such
conditions as he may deem fit to impose under the circumstances of the case for
the proper safeguard of the revenue interest, allow a unit to re-export goods;
(14)��� Omitted.
(15)��� Notwithstanding anything contained in this notification, the
exemption contained herein shall also apply to -
(a)��� goods which on importation into India are
use in the manufacture or development of electronics hardware or software
within the unit and such hardware or software (including rejects, waste and
scrap material arising in the course of manufacture and development of such
hardware or software), even if not exported out of India are allowed to be sold
in India under and in accordance with the Export and Import Policy and in such
quantity and subject to such limitations and conditions as may be specified in
this behalf by the Committee, on payment of duty of excise leviable thereon
under section 3 of the Central Excises and Salt Act, 1944 (1 of 1944) or where
such hardware or software (including rejects, waste and scrap material arising
in the course of manufacture and development of such hardware or software) are
not excisable, customs duty equal in amount to that leviable on the inputs
obtained under this notification and used for the purpose of manufacture or
development of such hardware or software (including rejects, waste and scrap
material arising in the course of manufacture and development of such
electronic hardware or software), which would have been paid, but for the
exemption under this notification, shall be payable at the time of clearance of
such electronic hardware or software (including rejects, waste and scrap
material arising in the course of manufacture and development of such hardware
or software);
(b)��� spares and consumables other than those
specified in the Table, to the extent of 1.5% of the ex-factory value of
manufacture of articles for export out of India by the unit during the
preceding year or such percentage in excess thereof as the Central Government
may, in each individual case allow having regard to the recommendations made to
it in this behalf by the Committee for the purpose of supply of such spares and
consumables with the exports articles for after-sale service, subject to the
condition that such supply is specifically stipulated in the relevant export
contract and the Assistant Collector of Customs is satisfied that the value of
such spares and consumables have been included for arriving at the value
addition as required under the said Export and Import policy:
Provided that sale of software within India
shall may be allowed through data communication link or telecommunication link
subject to such conditions as may be specified by the Commissioner of Customs.
(c)��� goods which on importation or procurement
are used for the manufacture or development of Electronics Hardware or
Software, within the unit and such hardware or software even if not exported
out of India, are allowed to be cleared to the warehouses appointed or
registered under notification of the Government of India in the Ministry of
Finance number 26/98-Central Excise (NT), dated the 15th July, 1998,
or cleared to the warehouses authorised to carry out manufacturing process or
other operations under section 65 of the Customs Act, 1962 (52 of 1962) and
under the Manufacture and Other Operations in Warehouse Regulations, 1966 or
cleared to the licence holders referred to in clause (e) of paragraph 9.10 of
the Export and Import Policy, without payment of duty;
(16)��� Subject to the satisfaction of the Assistant Commissioner of
Customs, duty shall not be liable in respect of:
(i)��� the said goods used for imparting training to workers.
(ii)��� the said goods or goods manufactured, produced,
processed or packaged in the unit, if such goods are destroyed within the said
complex;
(iii)�� the scrap or waste material or remnants
(arising in the course of such production, manufacture, processing or
packaging) if such scrap or waste material or remnants are destroyed within the
said complex;
(iv)��� the capital goods, if such capital goods are
destroyed within the complex or outside the said complex, where it is not
possible or permissible to destroy the same within the said complex, in the presence
of custom officer;
(17)� The Assistant Commissioner of Customs or
Deputy Commissioner of Customs may, subject to such conditions or limitations
as may be specified by him in this behalf and subject to approval of the
Inter-Ministerial Standing Committee, permit the goods imported or procured by
the unit or goods partially processed or manufactured or packaged therefrom to
be taken out of India for the purpose of processing if such processing is not
available in India, without payment of duty, and to be returned to the said
unit thereafter.
2.���� Notwithstanding anything contained in
paragraph 1 or this notification, the exemption contained herein shall also
apply to goods imported by an agency authorised by the Committee to set up an
Electronics Hardware Technology Park Complex for creating central facilities
for use by a unit in such a complex subject to the satisfaction of the
conditions in paragraph 1 of this notification.
3.���� Without prejudice to other provisions of
this notification, where the Assistant Commissioner or Deputy Commissioner of Customs
is satisfied that the unit, which has been permitted by the concerned State
Electricity Board in this behalf, has been permitted by Development
Commissioner to sell into Domestic Tariff Area (DTA) or transfer to other
hundred per cent export oriented undertaking or units in Export Processing Zone
or Software Technology Park or Electronic Hardware Technology Park or Special
Economic Zone, the surplus power generated in its diesel generating sets or
captive power plant subject to fulfilment of such conditions as may be
specified by the Assistant Commissioner or Deputy Commissioner of Customs on
this behalf, the Assistant Commissioner or Deputy Commissioner of Customs may
allow the unit -
(i) to sell such surplus power in Domestic Tariff
Area on payment of an amount equal to the duty leviable on consumables and raw
materials but for the exemption of duty thereon, used for generation of each
unit of power so sold in the Domestic Tariff Area on the basis of norms
approved by the Board of Approvals appointed by the notification of the
Government of India in the Ministry of Commerce and Industry, Department of
Commerce, number 14/1/2001-EPZ dated 7th August, 2001;
(ii)����� to
transfer such surplus power to other hundred per cent export oriented
undertaking or unit in Export Processing Zone or Software Technology Park or
Electronic Hardware Technology Park or Special Economic Zone without payment of
duty:
������� Provided that both supplying and
receiving unit shall maintain account for the quantity of consumables and raw materials
used in generation of each unit of power so transferred as quantified on the
basis of norms approved by the said Board of Approval, for the purpose of
calculation of Net Foreign Exchange earning as a Percentage of Export.
Explanation: For the purposes of
this notification, -
(a) �Designated
Officer� means an officer designated by the Department of Electronics in
pursuance of the notification of the Government of India in the Ministry of
Commerce No.42 (N-8)/92-97 dated the 14th September, 1992;
(b)
�Export and Import Policy� means the Export and Import Policy 1st
April 2002 �31st March 2007 published by the Government of India in
the Ministry of Commerce and Industry Notification No.1/ 2002-07, dated the 31st
March 2002, as amended from time to time.
Sl.
No.
|
Description
of Goods
|
(1)
|
(2)
|
1.
|
Capital goods
|
2.
|
Raw materials
|
3.
|
Components
|
4.
|
Spares and accessories of capital goods
|
5.
|
Material handling equipment, namely,
forklifts, over-head cranes, mobile cranes, crawler cranes, hoists and
stackers
|
5A.
|
Uninterrupted power supply system (UPS),
pollution control equipment, quality assurance equipment, storage systems,
special racks for storage, modular furniture, computer furniture, anti-static
carpet, teleconference equipment, servo control system, panels for
electricals and air-conditioning system.
|
5B.
|
Spares and consumables for goods specified
at serial number 5A above.
|
6.
|
Consumables required for the manufacture of
goods
|
7.
|
A prototype or a
technical sample for each of the existing products for the purpose of product
diversification, development or evaluation.
|
8.
|
Drawing, blue prints, technical maps,
charts, relating to the manufacturing activity
|
9.
|
Packaging materials
|
10.
|
Office equipments including PABX, fax
machine, video projection system, computer, laptop, server, spares and
consumables thereof.
|
11.
|
Tools, jigs, gauges, fixtures, moulds,
dies, instruments and accessories
|
12.
|
Captive power plants or captive generating
sets and transformers as recommended by the Designated Officer.
|
12A
|
Omitted.
|
12B
|
Spares, fuels, lubricants, consumables and
accessories for the captive power plants and captive generating sets and
spares, consumables and accessories for transformers as approved by the
Assistant Commissioner of Customs or Deputy Commissioner of Customs.
|
13.
|
Goods re-imported within three years of the
date of exportation for repairs or re-conditioning failure or re-engineering
|
14.
|
Goods re-imported within one year from the
date of exportation from the unit due to failure of the foreign buyer to take
delivery
|
15.
|
Goods imported for repairs, reconditioning,
testing calibration, quality improvement, upgradation of technology and
re-engineering activities and export thereof within three years of the date
of importation.
|
16.
|
Raw materials for making capital goods for
use within the unit for the purpose of production or manufacture of export
goods.
|
17.
|
Any other item required in relation to
production of export goods with the prior approval of Inter-Ministerial
Standing Committee.
|