Chapter 72: Iron and Steel ITC HS Code Classification. DGFT Issued HS Classification Codes in Handbook of Procedure Vol-III. Hs Codes of year 2008, 2007, 2006, 2005 HS Classification Search Product Keywords HS Code HS Codes Chapters HS Classification of Chapter 72: Iron and Steel HS Codes Sub-Heading Sub Heading CodeSub Heading Description 7201Harmonised Codes of Pig iron and spiegeleisen in pigs, blocks or other primary forms 7202Harmonised Codes of Ferro-alloys - Ferro-manganese : 7203Harmonised Codes of Ferrous Products Obtained By Direct Reduction Of Iron Ore And Other Spongy Ferrous Products, In Lumps, Pellets Or Similar Forms; Iron Having Minimum Purity By Weight Of 99.94%, In Lumps, Pellets Or Similar Forms 7204Harmonised Codes of Ferrous waste and scrap; remelting scrap ingots of iron or steel 7205Harmonised Codes of Granules and powders, of pig iron, spiegeleisen, iron or steel 7206Harmonised Codes of Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203) 7207Harmonised Codes of Semi-finished Products Of Iron Or Non-alloy Steel - Containing By Weight Less Than 0.20% Of Carbon : 7208Harmonised Codes of Flat-rolled Products Of Iron Or Non-alloy Steel, Of A Width Of 600 Mm Or More, Hot- Rolled, Not Clad, Plated Or Coated 7209Harmonised Codes of Flat-rolled Products Of Iron Or Non-alloy Steel, Of A Width Of 600 Mm Or More, Cold- Rolled (cold-reduced), Not Clad, Plated Or Coated - In Coils, Not Further Worked Than Cold-rolled (cold- Reduced) : 7210Harmonised Codes of Flat-rolled Products Of Iron Or Non-alloy Steel, Of A Width Of 600 Mm Or More, Clad, Plated Or Coated - Plated Or Coated With Tin : 7211Harmonised Codes of Flat-rolled Products Of Iron Or Non-alloy Steel, Of A Width Of Less Than 600 Mm, Not Clad, Plated Or Coated - Not Further Worked Than Hot-rolled : 7212Harmonised Codes of Flat-rolled Products Of Iron Or Non-alloy Steel, Of A Width Of Less Than 600 Mm, Clad, Plated Or Coated 7213Harmonised Codes of Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel 7214Harmonised Codes of Other Bars And Rods Of Iron Or Non-alloy Steel, Not Further Worked Than Forged, Hot- Rolled, Hot-drawn Or Hot-extruded, But Including Those Twisted After Rolling 7215Harmonised Codes of Other bars and rods of iron or non-alloy steel 7216Harmonised Codes of Angles, Shapes And Sections Of Iron Or Non- Alloy Steel 7217Harmonised Codes of Wire of iron or non-alloy steel 7218Harmonised Codes of Stainless Steel In Ingots Or Other Primary Forms; Semi-finished Products Of Stainless Steel 7219Harmonised Codes of Flat-rolledproductsofstainlesssteel,ofawidth Of600mmormore - Not Further Worked Than Hot-rolled, In Coils : 7220Harmonised Codes of Flat-rolledproductsofstainlesssteel,ofawidth Of Less Than600mm - Not Further Worked Than Hot-rolled : 7221Harmonised Codes of Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel 7222Harmonised Codes of Other Bars And Rods Of Stainless Steel; Angles, Shapes And Sections Of Stainless Steel - Barsandrods,notfurtherworkedthanhot-rolled, Hot-drawnorextruded: 7223Harmonised Codes of Wire of stainless steel 7224Harmonised Codes of Other alloy steel in ingots or other primary forms; semi-finished products or other alloy steel 7225Harmonised Codes of Flat-rolled Products Of Other Alloy Steel, Of A Width Of 600 Mm Or More - Of Silicon-electrical Steel : 7226Harmonised Codes of Flat-rolled Products Ofotheralloy Steel,of A Width Of Less Than 600 Mm - Of Silicon-electrical Steel : 7227Harmonised Codes of Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel 7228Harmonised Codes of Other Bars And Rods Of Other Alloy Steel; Angles, Shapes And Sections, Of Other Alloy Steel; Hollow Drill Bars And Rods, Of Alloy Or Non-alloy Steel 7229Harmonised Codes of Wire of other alloy steel Total: 29 HS Codes Sub-Heading
Get Sample Now Which service(s) are you interested in? Export Data Import Data Both Buyers Suppliers Both OR Exim Help + Exim News Date: 14-11-2025 Anil Ambani offers to 'virtually appear' before ED in FEMA case Date: 14-11-2025 I am an OCI card holder, can I become a joint owner in a land bought by my mother? Date: 14-11-2025 Rupee falls 5 paise to 88.75 against US dollar in early trade Date: 14-11-2025 In rare admission, Pakistani minister admits his country could not benefit from China-Pakistan Econo Date: 14-11-2025 Trump administration prepares tariff exemptions in bid to lower food prices Date: 12-11-2025 Retail inflation slows to a record low of 0.25% in October Date: 12-11-2025 Trump’s $2,000 tariff dividend: Who qualifies, and who gets left out Date: 12-11-2025 Tata Motors CV hits top gear on debut post demerger. Here are 7 takeaways from the listing Date: 12-11-2025 Tata Motors CV shares debut at 28% premium. Should investors stay on board? Date: 11-11-2025 India’s net direct tax collection up 7% in FY26 so far to Rs 12.92 lakh crore What is New? Date: 12-11-2025 Notification No. 32/2025-Customs (ADD) Seeks to impose anti-dumping duty on Hot-rolled flat products of alloy or non alloy steel originating in or exported from Vietnam Date: 07-11-2025 Notification No. 31/2025 -Customs (ADD) Seeks to impose anti dumping duty on imports of “Flax or Linen fabric having flax content of more than 50%” originating in or exported from China and Hong Kong Date: 04-11-2025 Notification No.73/2025-Customs (N.T.) Transhipment of Cargo to Nepal under Electronic Cargo Tracking System (Amendment) Regulations, 2025 by amendment of Principal Notification No. 68/2019-Customs (N.T.) dated 30th September, 2019 Date: 31-10-2025 Notification No. 72/2025-CUSTOMS (N.T.) Fixation of Tariff Value of Edible Oils, Brass Scrap, Areca Nut, Gold and Silver Date: 30-10-2025 NOTIFICATION No 68/2025-Customs (N.T.) Assignment of Proper Officer under section 18A Date: 30-10-2025 NOTIFICATION No. 69/2025-Customs (N.T.) Levy of Fees (Customs Documents) Amendment Regulations, 2025 Date: 30-10-2025 NOTIFICATION No. 70/2025-Customs (N.T.) Customs (Voluntary Revision of Entries Post Clearance) Regulations, 2025 Date: 30-10-2025 NOTIFICATION No. 71/2025-Customs (N.T.) Conditions, where no revision allowed under Section 18A Date: 23-10-2025 NOTIFICATION No. 66/2025 - Customs (N.T.) Notification of ICD Malur, Kolar District, Karnataka u/s. 7(1)(aa) of Customs Act, 1962" and it was issued under Section 7(1)(aa) of Customs Act, 1962. Date: 18-10-2025 NOTIFICATION No. 17/2025 – CENTRAL TAX Seeks to extend date of filing GSTR-3B.
Indian Customs CBEC - Indian Customs Offices Indian Customs Duty Customs Exchange Rate HS Code List - Countrywise Safegaurd Duty Anti Dumping Duty Duty Drawback Rates
DGFT Dgft offices in India Exim Policy IEC Number Dgft Notification Dgft Public Notices Dgft Circulars Trade Notice Depb Rates
Central Excise Central Excise Offices Central Excise Duty Central Excise Notification Central Excise Notification tarrif Central Excise Notification Non-Tarrif Central Excise Circulars Central Excise Instruction Central Excise Manual