Powered by InfodriveIndia.com

Amendments in the Notification No. 25/99-Customs dated 28th February 1999, CUSTOMS Notification No 26/2002, 01-03-2002


Date: 01-03-2002
Notification No: CUSTOMS Notification No 26/2002
Issuing Authority: Indian Customs  
Type: Tariff
File No:
Subject: Amendments in the Notification No. 25/99-Customs dated 28th February 1999
Amendments in the Notification No. 25/99-Customs dated 28th February 1999

Customs Notification No. 26 dated 1st March 2002

In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government being satisfied that it is necessary in the public interest so to do, hereby makes the following amendments in the notification of the Government of India in the Ministry of Finance (Department of Revenue) No. 25/99-Customs, dated the 28th February, 1999, namely: -

In the said notification, in the Table, -

(i)     in List A, -

(a)      against S.No.2, in the entry in column (3), for the words �Potassium Carbonate�, the words �Potassium Carbonate/ Potassium Nitrate (prilled)� shall be substituted;

(b)      against S.No.92, for the entry in column (3), the following shall be substituted, namely :-

�Beryllium Copper rods/ strips/ sheets/ wire/ foils, with or without plating; Rectangular Profile Brass material (CuZn39Pb2)�;

(c)      against S.No.94, in the entry in column (3), for the words �Continuous cast copper wire rod�, the words �Continuous cast copper wire rod/ copper scrap� shall be substituted;

(d)      against S.No.107, in the entry in column (4), for the letters and words �RF/ IF Coils or transformers and� , the letters and words �RF/ IF Coils; Transformers (other than Power transformers); � shall be substituted;

(e)      after S.No.121, and the entries relating thereto, the following S. Nos. and the entries shall be inserted, namely:-

(1)

(2)

(3)

(4)

122

39, 74, 75, 76

Composite copper clad materials consisting of Paper + Epoxy + Glass cloth

Printed Circuit Boards

123

74

Glass Epoxy Copper clad laminates or Paper Phenolic Copper clad laminates

Printed Circuit Boards

124

74

Copper foils (plain or adhesive coated)

Copper clad laminates (phenolic or glass epoxy types); composite type copper clad laminates; multi-layer Printed Circuit Boards

125

28, 29, 38, 72, 74, 84

 

 Cupric Chloride Etchant; Ammonical Etchants; Solid Carbide Drills; Routers; Hot Air Levelling Flux; Electroless Copper Plating Solution; Sensitisers; Activators; Post Activators; Copper foil of refined copper; Colloidal/ Semi colloidal Graphite (Shadow)

Printed Circuit Boards

126

28, 29, 39, 68, 71, 81, 82

 

Plastic Film for Wafer Dicing; Graphite Jigs/ Block/ Rods/ Plates Dicing blades/ wheels; Tungsten filament and or parts thereof; Tungsten Wire/ Rod; Colour Paste and Diffusants; Silver conductive paste/ Suspension; Palladium Wire; n- Butyl Acetate; Bonding Tools

LED/ LED Displays; Semiconductor Devices; Hybrid Microcircuits; Mounted Piezo Electric Crystals; Resistors; Potentiometers

127

70, 85

Parts of data graphic display tubes (colour), with a phosphor dot screen pitch smaller than 0.4mm

 

Data graphic display tubes (colour), with a phosphor dot screen pitch smaller than 0.4mm

128

70, 75

Glass Tubes/ Insulators/ Spacers; Nickel Eyelets

 

Mounted piezo electric crystals

129

39

Diallylphthalate (DAP) Moulding Powder or Compound; Plain or Glass/ Fibre filled with or without additives

 

Connectors; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Potentiometers; Relays of contact rating upto 7 amperes; Resistors

130

39

Polyvinyl Chloride Film/ Sheet

Floppy Disks/ Diskettes

131

28, 38, 39

Gold plating make up and replenisher solutions and salts; Resins for gold recovery

 

Semiconductor devices; LED/ LED Displays; Connectors; PCBs

132

74

Solder Plated Annealed Copper Wire (SCA) of diameter 0.4mm to 1mm

Plastic film capacitors

133

79

 

Zinc of purity 99% or above in Rod, Wire or Strip form; Zinc Wire/ Zinc- Aluminium wire with dia up to 5mm; Tin - zinc wire with dia upto 3mm

Electronic Capacitor Grade Metallised Plastic Film/ Capacitors

134

80

Tin Foil/ Tin Alloy Foil

 

Plastic Film Capacitors; Resistors (other than heating resistors)

135

76

Aluminium wire (of purity 99.9% or above) of dia upto 3mm

 

Lead Wires/ Lead Tabs for electrolytic capacitors; Electronic Capacitor grade Metallized Plastic film; Plastic film capacitors; semiconductor devices

136

28

Barium Carbonate

Ceramic Capacitors

137

38, 39, 69

Hydroxy Propyl Methyl Cellulose Barium Titanate based or Lead Titanate based Ceramic composition/ Powder

Ceramic Capacitors, Ceramic Substrates/ Rods/ Discs/ Dielectric

138

28

Magnesium Oxide (Purity not less than 98%); Zinc Oxide (Purity not less than 98%); Nickel Oxide (Purity not less than 98%); Aluminium Oxide (Purity not less than 99.9%); Vanadium Pentoxide (Purity not less than 99.9%); Lithium Carbonate (Purity not less than 99%); Manganese Carbonate (Purity not less than 98%); Bismuth Oxide (Purity not less than 99%); Cobalt Oxide (Purity not less than 99%); Copper Carbonate (Purity not less than 98%); Chromium Oxide (Purity not less than 98%); Indium Oxide (Purity not less than 99%); Dysprosium oxide (Purity not less than 99%); Gadolinium Oxide (Purity not less than 99%); Yttrium Oxide (Purity not less than 99.9%); Calcium Carbonate (Purity not less than 98%); Tin Oxide (Purity not less than 98%); Magnesium Carbonate (Purity not less than 99%); Iron Oxide (Purity not less than 99%); Barium Carbonate (Purity not less than 99%)

Resistors; Ceramic Capacitors

139

39, 48, 59

 Resin -VAGH Co-Polymerised Vinyl Chloride Vinyl Acetate, Pressure Sensitive felt, with or without adhesive, Silicon Coated/ Carbonized silicon paper

Magnetic Tapes/Cassettes

140

39

Polyimide Film (Kapton)

 

IC Sockets (Connectors); Resistors; Potentiometers; Semiconductor devices

141

39

Modified Polyphenylene Oxide

Deflection Components; potentiometers

142

39

Phenolic Moulding Powder/ Resin

 

Resistors; Potentiometers; Capacitors; Hybrid Micro-circuits

143

72, 74

 

Lead wires of Iron or non alloy steel plated or coated with other base metals

 

Resistors; Potentiometers; Plastic Film Capacitors; Lead Wire/Lead Tabs of Electrolytic Capacitors

144

29, 72, 74, 76, 85

Copper alloy resistance wire and strips; Steel or Aluminium in substrate or sheet form; Butyl DiGol

Resistors; Potentiometers

145

81

Metal alloy targets

 

Resistors; Resistor Grade Metallized Ceramic Cores

146

85

 

Chip Transistors; Varicap Diodes

Tuners; Modulators; Hybrid Micro Circuits

147

74

Cladded Copper/ Copper Alloy Strip/ Foil

 

Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Connectors

148

28

Zinc Oxide (Purity minimum 99.5%); Strontium Oxide/ Strontium Carbonate; Zinc Stearate (Purity minimum 99%); Polyvinyl alcohol (PVA); Polyvinyl Butyral (Ash Content max 1%)

Pre-Calcined Ferrite Powder (Spray Dried); Resistors

149

28

Zirconium Oxide (Purity not less than 99%); Tin Oxide (Purity not less than 99%); Lanthanam Oxide (Purity not less than 99%); Zinc Oxide (Purity not less than 98%); Polystyrene (Purity not less than 98%); Magnesium Oxide (Purity not less than 98%); Calcium Carbonate (Purity not less than 98%); Tantalum Oxide (Purity not less than 99%); Barium Carbonate (Purity not less than 99%)

Microwave Dielectrics; Ceramic Capacitors; Resistors; Varistors; Thermistors

150

39

Phenolic Moulding Powder/ Resin

 

Hybrid Micro circuits; Potentiometers; Ceramic Capacitors; Thermistors; Varistors; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Connectors

151

39, 69

 Guide Ceramic; Guide LCP (Liquid Crystal Polymer)

Print heads

152

85

Parts of Loudspeaker

Loudspeakers

153

74, 85

High Voltage Rectifier Diodes; Focus Potmeter; Electrolytic Tough Pitch Wire/ Rods/ Formed Pins/ parts made thereof

Deflection Components

154

39

Polycarbonate (Plain or glass filled moulding powder)

 

Resistors; Potentiometers; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC

155

39

Poly Vinyl Acetate        

 

Resistors; Potentiometers; Hybrid Micro Circuits

156

72

 

Nickel Iron (low carbon/ gas free grade) in Sheet or strip form/ EB Welded Triple Metal Strips/ Controlled Expansion Alloy Strips

Resistors; Potentiometers;

157

39

SRBP (Synthetic Resin Bonded Paper) Substrates

 

Potentiometers; Switches with contact rating les than 5 amperes at voltage not exceeding 250 Volts AC or DC

158

25

Ball Clay

 

Ceramic Cores/ Substrates for resistors

159

32

 

Borosilicate Glass Powder

Parts of Electron Gun/ Multiform Bead Glass Rods

160

74

Unplated Brass Strips in Coil form 70 mm width; Phosphor Bronze Strips in Coil Form

Connectors

161

72, 74

Bimetal sheets in coil forms/ piece parts; Copper clad steel sheets in coil forms/ piece parts

Relays of contact rating upto 7 amperes

162

28, 29

 Ammonium Dihydrogen Phosphate; Ammonium pantaborate

Electrolytic Capacitors

163

38

Carbon/ Flurographite Powder

Potentiometers

164

28, 34

Boron Nitride Suspension; Metallisation Inhabitation Fluid (Oil)

Electronic Capacitor Grade metallised Plastic Film/ Plastic Film Capacitors

165

29

Dowanol PX-16S (Non- CFC solvent)

 

Flyback Transformers/ Focus Resistors

166

28, 29, 38, 48

Monoalkylethers of ethylene glycol.; Flux 1544; Ammonium Hydroxide (CMOS Grade); Ammonia (Np) (CMOS Grade); Lid perform; Chemcassette

Semiconductor devices

167

76

Etched Aluminium Foil

Formed Aluminium Foil for electrolytic capacitors

(ii)    in List B, S. Nos. 5, 6 and 7 and the entries relating thereto, shall be omitted.

 

       


Enquiry Form

Fields marked with an asterisk * are required.

 




What is New?

Date: 18-12-2014
Customs Circular No 17/2014
Regarding authentication of supply invoice/ ARE-3 by the Central Excise Authorities for Claiming Deemed export benefits

Date: 18-12-2014
Customs Circular No 15/2014
Regarding norms for Execution of Bank Guarantee in respect of Advance License/Export Promotion Capital Goods (EPCG) Schemes

Date: 18-12-2014
Customs Circular No 16/2014
Regarding re-warehousing of goods imported and/or procured indigenously by EOU/EHTP/STP/BTP units

Date: 18-12-2014
Customs Notification No 116/2014 (NT)
Rate of exchange of conversion of each of the foreign currency with effect from 19th December, 2014

Date: 18-12-2014
DGFT Public Notice No.78/(RE 2013)/2009-14
Deferment of implementation of the procedure for export of certified organic products.

Date: 17-12-2014
RBI/2014-15/360 A.P. (DIR Series) Circular No.51
Foreign Exchange Management (Deposit) Regulations, 2000 - Exemption thereof

Date: 17-12-2014
Customs Notification No 115/2014 (NT)
Amends Exchange Rate notfn. 113/2014-Customs (NT) effective from 18th December, 2014

Date: 17-12-2014
Central Excise Circular No. 991/07/2014-CX
Amendment to CESTAT Appeal Forms

Date: 16-12-2014
RBI/2014-15/357 A.P. (DIR Series) Circular No.49
Money Transfer Service Scheme – Delegation of work to Regional Offices-Submission of Statements / Returns

Date: 16-12-2014
RBI/2014-15/358 A.P.(DIR Series) Circular No.50
Rupee Drawing Arrangement – Delegation of work to Regional Offices-Submission of Statements / Returns