Government of India
Ministry of Commerce & Industry
Department of Commerce
Directorate General of Foreign Trade
Udyog Bhawan, New Delhi-110011
Public Notice No. 16 /(RE-2010)2009-2014
Dated: the 26 November, 2010
Subject:-Amendment/modification of SION
S.No.C-739 under Engineering Product Group.
In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade
Policy, 2009-14, the following amendment is made in the Handbook of Procedure
Vol. II ( as stated in paragraph 1.1 of Vol.I):
SION S.No.C-739 of the Product Group “Engineering
Product”
(Product Code: C)
Earlier Entry :
Sl. No. |
Export Item |
Qty |
Import Item |
Qty |
C-739 |
Nyloc Self Locking Nuts, Steel Locking Nuts and Wheel Nuts made from
EN/AISI/DIN /JIS Series Steel excluding Stainless Steel |
1 MT |
EN/AISI/DIN/JIS Series Steel excluding Stainless Steel in the form
of Wire Rods/HEX Bars in Coils and/or Straight Length |
1.939 MT |
Amended Entry :
Sl. No |
Export Item |
Qty |
Import Item |
Qty |
C-739 |
Nyloc Self Locking Nuts, Steel Locking Nuts and Wheel Nuts made from
EN/AISI /DIN/ JIS Series Steel excluding Stainless Steel
|
1 MT |
Relevant EN/AISI/DIN/JIS Series Steel (excluding Stainless Steel) in
the form of Wires/Wire Rods/ HEX Bars in Coils and/or Straight Length
|
1.939 MT/MT content in the export product |
Note:- The Wire would have to be of a diameter more than the
diameter of exported end product.
Effect of this amendment :
Wires are also permitted as an admissible input to be imported under the
condition that such wire must be of larger diameter than the exported end
product. There is no change in quantity of input permitted per tonne of export
item.
(Anup K. Pujari)
Director General of Foreign Trade
E-mail:[email protected]
(Issued from F. No. 01/81/162/319/AM’10/DES-II)