S.O.(E)- In exercise of powers conferred by Section 5 of the Foreign Trade ( Development and Regulation ) Act, 1992 read with paragraph 2.1 of the Foreign Trade Policy, 2004-09, the Central Government hereby amends the ITC(HS) Classification of Export and Import Items, 2004-09 as under.
2. The List of Special Chemicals , Organisms , Materials , Equipment and Technologies as given in Appendix 3 to Schedule 2 of ITC(HS) (HS) Classification of Export and Import Items, 2004-09 stands amended. The amended Appendix-3 is annexed.
3. The restrictions on export of items listed under Category �O� of Appendix �3 , namely � Nuclear materials, nuclear-related other materials, equipment and technology � shall however come into effect from the date of promulgation of relevant notifications by the Department of Atomic Energy under the Atomic Energy Act,1962. Until such time, restrictions on the list of items under this category, as notified by this Department vide Notification No 2/2004-2009 dated 31.8.2004 shall continue to be in force.
4. This issues in Public interest.
(K.T.CHACKO)
DIRECTOR GENERAL OF FOREIGN TRADE
AND EX-OFFICIO ADDITIONAL SECRETARY TO THE GOVT. OF INDIA (Issued from File No. 01/91/171/14/AM06/PC.III)
File No. 01/91/171/14/AM06/PC.III
( S.K.SHRIVASTAVA)
DEPUTY DIRECTOR GENERAL OF FOREIGN TRADE
APPENDIX-3
Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) export of which is regulated
Note: Please see the Policy Statement at Code No. 0005 in table A of Schedule 2 of the ITC (HS) Classifications of Export and Import Items.
Export of Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) listed below shall be permitted only against an export licence issued in this behalf unless export is prohibited or is permitted without licence subject to fulfilment of conditions, if any, as indicated under/against any specific category or item.
Exporters are advised to refer to the relevant guidelines relating to the export of SCOMET items in the Handbook of Procedures (Vol.I), as issued from time to time.
Glossary: Expressions used in the SCOMET List below have the following meanings:
�Development�: Activity related to all phases prior to �production� such as design, design research, design analysis, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts.
�Microcircuit�: A device in which a number of passive and/or active elements are considered as indivisibly associated on or within a continuous structure to perform the function of a circuit.
�Microprogrammes�: A sequence of elementary instructions maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction register.
�Production equipment�: Tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components thereof, limited to those specially designed or modified for �development� or for one or more phases of �production�.
�Production facilities�: Equipment and specially designed �software� thereof integrated into installations for �development� or for one or more phases of �production�.
�Programmes�: A sequence of instructions to carry out a process in, or convertible into, a form executable by an electronic computer.
�Radiation hardened�: Means that the component or equipment is designed or rated to withstand radiation levels which meet or exceed a total radiation dose of 5 x 104 Gy (Silicon).
�Software�: A collection of one or more �programmes�, or �micro-programmes�, fixed in any tangible medium of expression. However, unless otherwise provided for against any item on the SCOMET List, the List does not control �software� which is either in the �public domain� or is generally available to the public by being :
a. Sold from stock at retail selling points without restriction, by means of:
1. Over-the-counter transactions;
2. Mail order transactions; or
3. Telephone call transactions; and
b. Designed for installation by the user without further substantial support by the supplier.
�Public domain� means a domain that has no restrictions upon dissemination of information within or from it; the existence of any legal rights to the intellectual property in that information does not remove the information from being in �public domain.�
�Technology� means, except as otherwise provided for against any item in the SCOMET List, information (including information embodied in software) other than information in the public domain, that is capable of being used in:
a. the development, production or use of any goods or software;
b. the development of, or the carrying out of, an industrial or commercial activity or the provision of a service of any kind.
Explanation: When technology is described wholly or partly by reference to the uses to which it (or the goods to which it relates) may be put, it shall include services which are provided or used, or which are capable of being used, in the development, production or use of such technology or goods.
�Specially designed� qualifies the description of equipment, parts, components or �software� which, as a result of �development�, have unique properties that distinguish them for certain predetermined purposes. For example, a piece of equipment that is �specially designed� will only be considered so if it has no other function or use. Thus a piece of manufacturing equipment that is �specially designed� to produce a certain type of component will only be considered such if it is not capable of producing other types of components.
�Designed or modified� describes equipment, parts or components which, as a result of �development,� or modification, have become endowed with specified properties that make them fit for a particular application.
�Usable in,� �usable for,� �usable as� or �capable of� qualifies the description of equipment, parts, components, materials, technology or �software� which are suitable for a particular purpose. There is no requirement that the equipment, parts, components, technology or �software� should have been configured, modified or specified for that particular purpose. (Contrast with �specially designed� � see above).
�Modified� in the context of �software� describes �software� which has been intentionally changed such that it has properties that make it fit for specified purposes or applications. Its properties may also make it suitable for purposes or applications other than those for which it was �modified.�
�Use� includes operation; installation (including on-site installation); maintenance; repair; overhaul; refurbishing.
Items on the SCOMET List are organised in the following categories.
| Category 0 |
Nuclear materials, nuclear-related other materials, equipment and technology |
| 0A |
Prescribed Substances |
| 0A1 |
Source Material |
| 0A2 |
Special Fissionable Material |
| 0A3 |
Other Materials |
| 0B |
Prescribed Equipment |
| 0C |
Technology |
| Category 1 |
Toxic chemical agents and other chemicals |
| 1A |
Prohibited chemicals |
| 1B |
Chemicals permitted only to States party to the Chemical Weapons Convention |
| 1C |
Chemicals permitted also to States not party to the Chemical Weapons Convention |
| Category 2 |
Micro-organisms, toxins |
| 2A |
Bacteria |
| 2B |
Fungi |
| 2C |
Parasites |
| 2D |
Viruses |
| 2E |
Rickettsials |
| 2F |
Toxins |
| 2G |
Plant pathogens |
| 2H |
Genetically Modified Organisms |
| Category 3 |
Materials, Materials Processing Equipment and related technologies |
| 3A |
Materials |
| 3A1 |
Special materials |
| 3A2 |
Structural materials |
| 3A3 |
Rocket propellants and constituent chemicals |
| 3A4 |
High explosives |
| 3A5 |
Stealth materials |
| 3B |
Materials processing and production equipment, and related technology |
| 3C |
[Reserved] |
| 3D |
Chemical and biomaterial manufacturing and handling equipment and facilities |
| Category 4 |
Nuclear-related other equipment and technology, not controlled under Category 0 |
| 4A |
Equipment, assemblies, components including test and production equipment |
| 4B |
Equipment, assemblies, components including test and measurement equipment usable in development of nuclear explosive devices |
| 4C |
Technology |
| Category 5 |
Aerospace systems, equipment, including production and test equipment, and related technology |
| 5A |
Rocket systems |
| 5A1 |
Systems |
| 5A2 |
Production and test equipment |
| 5A3 |
Technology |
| 5B |
Unmanned aerial vehicles |
| 5C |
Avionics and navigation systems |
| 5D |
Manned-aircraft, aero-engines, related equipment and components |
| 5E |
Micro-light aircraft and powered �hang-gliders� |
| Category 6 |
[RESERVED] |
| Category 7 |
Electronics, computers, and information technology including information security |
| 7A |
Electronics |
| 7B |
Electronic test equipment |
| 7C |
Computers |
| 7D |
Information technology including information security |
| 7E |
[Reserved] |
Category 0 - Nuclear materials, nuclear-related other materials, equipment and technology
Note: Export of these items is regulated under the Atomic Energy Act, 1962 and rules framed, and notifications/orders issued thereunder from time-to-time by the Department of Atomic Energy. The licensing authority for items in this category is the Department of Atomic Energy. An application for licences to export prescribed equipment or/an prescribed substances shall be made in writing to the Joint Secretary, Department of Atomic Energy, Anushakti Bhavan, CSM Marg, Mumbai 400 001.
| 0A |
Prescribed Substances
Note : Any radioactive material in Category 0A shall additionally attract the provisions of the Atomic Energy (Radiation Protection) Rules, 2004 made under the Atomic Energy Act, 1962 and the provisions of Section-16 of the Atomic Energy Act, 1962.
|
(Above entries at 0A has been amended vide NTF. NO. 44/2005, DT. 10/02/2006)
|
"Pre-Revised-
0A |
Prescribed Substances
Note: Any radioactive material in Category 0A shall additionally attract the provisions of Radiation Protection Rules, 2004 made under the Atomic Energy Act, 1962 and the provisions of Section-16 of the Atomic Energy Act, 1962.] |
| 0A1 |
Source Material |
| 0A101 |
Uranium containing the mixture of isotopes occurring in nature. |
| 0A102 |
Uranium depleted in the isotope 235. |
| 0A103 |
Thorium. |
| 0A104 |
Any of the foregoing in the form of metal, alloy, chemical compound, or concentrate or any substance. |
| 0A105 |
Any other material containing one or more of the foregoing.
Prescribed quantitative limits: as given below and in any period of 12 months:
a. Uranium (containing the mixture of isotopes in nature) exceeding 100 kilograms.
b. Depleted uranium (uranium depleted in the isotope 235 below that occurring in nature) exceeding 1000 kilograms.
c. Thorium exceeding 1000 kilograms. |
| 0A2 |
Special Fissionable Material |
| 0A201 |
Plutonium-239. |
| 0A202 |
Uranium-233. |
| 0A203 |
Uranium enriched in the isotopes 235 or 233. |
| 0A204 |
Neptunium. |
| 0A205 |
Any material containing one or more of the foregoing. |
| 0A206 |
Such other fissionable material determined by the Central Government from time to time, but the term �special fissionable material� does not include source material.
Note: Any quantity of special fissionable material is prescribed substance. |
| 0A3 |
Other Materials
�Other Materials� means non-nuclear materials for reactors, nuclear related dual-use materials indicated below and such materials as determined by the Central Government from time to time. |
| 0A301 |
Deuterium, heavy water (deuterium oxide) and any other deuterium compound, in which the ratio of deuterium to hydrogen atoms exceeds 1:5000, in quantities exceeding 5 kilograms of deuterium in one consignment or 25 kilograms of deuterium in any period of 12 months. |
| 0A302 |
Nuclear grade graphite / carbon, having a purity level better than 5 parts per million (ppm) boron equivalent and with a density greater than 1.5 gram/cc in quantities exceeding 30 metric tons in any period of 12 months. |
| 0A303 |
Zirconium with hafnium content of less than 1 part to 500 parts of zirconium by weight (i.e. less than 2000 ppm) in the form of metal, its alloys, compounds, manufactures thereof, waste or scrap of any of the foregoing. |
| 0A304 |
Beryllium, its compounds, alloys and its minerals / concentrates including Beryl but excluding:
a. beryllium windows used for x-ray machines and gamma ray detectors and
b. beryl in the form of emeralds or aquamarines. |
| 0A305 |
Lithium enriched in the Lithium-6 (6Li) isotope to greater than its natural isotopic abundance (i.e. more than 7.5%) and the products or devices containing enriched lithium such as elemental lithium, alloys, compounds, mixtures containing lithium, manufactures thereof, waste or scrap of any of the foregoing. |
| 0A306 |
Niobium and Tantalum, their metals, alloys and minerals including columbite and tantalite. |
| 0A307 |
Titanium alloys having both of the following characteristics:
a. �Capable of� an ultimate tensile strength of 900 MPa or more at 293 K (200C); and
b. In the form of tubes or cylindrical solid forms (including forgings) with an outside diameter of more than 75 mm.
Technical note: The phrase �capable of� encompasses titanium alloys before or after heat treatment. |
| 0A308 |
Tritium, tritium compounds or mixtures containing tritium in which the ratio of tritium to hydrogen atoms exceeds 1 part in 1000, except when utilized in such quantities and for such purposes as for organic labelled compounds, Gas Filled Light Sources and as Tritiated Water for radiotracer studies. |
| 0A309 |
Hafnium:
Hafnium metal, alloys containing more than 60% hafnium by weight, hafnium compounds containing more than 60% hafnium by weight, manufactures thereof, and waste or scrap of any of the foregoing. |
| 0A310 |
Radium-226:
Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium-226, manufactures thereof, and products or devices containing any of the foregoing, except medical applicators and a product or device containing less than 0.37 GBq (10mCi) of Ra-226 in any form. |
| 0A311 |
Boron
Boron enriched in the Boron-10 (10B) isotope to greater than its natural isotopic abundance as follows:
Elemental boron, compounds, mixtures containing boron, manufactures thereof, waste or scrap of any of the foregoing. |
| 0A312 |
Helium-3
Helium-3 (3He), mixtures containing helium-3, and products or devices containing any of the foregoing.
Note: A product or device containing less than 1gm of Helium-3 is excluded. |
| 0A313 |
Alpha�emitting radionuclides:
Alpha�emitting radionuclides having an alpha half-life of 10 days or greater but less than 200 years, in the following forms:
a. Elemental;
b. Compounds having a total alpha activity of 37 GBq per kg or greater;
c. Mixtures having a total alpha activity of 37 GBq per kg or greater;
d. Products or devices containing any of the foregoing. |
| 0A314 |
*Titanium ores and concentrates (Ilmenite, Rules and Leucoxene)
*Note : These items (0A314 and 0A315) shall remain prescribed substances only till such time as the Policy on Exploitation of Beach Sand Minerals notified vide Resolution under 8/1(1)/97-PSU/1422 dated 6th October, 1998 is adopted / revised / modified by the Ministry of Mines or till the 1st January 2007, whichever occurs earlier and shall cease to be so thereafter.
|
| 0A315 |
*Zirconium, its alloys and compounds and minerals / concentrates including zircon.
*Note : These items (0A314 and 0A315) shall remain prescribed substances only till such time as the Policy on Exploitation of Beach Sand Minerals notified vide Resolution under 8/1(1)/97-PSU/1422 dated 6th October, 1998 is adopted / revised / modified by the Ministry of Mines or till the 1st January 2007, whichever occurs earlier and shall cease to be so thereafter.
|
(Above entries at 0A314 & 0A315 has been added vide NTF. NO. 44/2005, DT. 10/02/2006)
|
Alpha emitters controlled by this item include:
| Actinium-225 |
Actinium-227 |
Americium-242m |
| Californium-248 |
Californium-250 |
Californium-252 |
| Californium-253 |
Californium-254 |
Curium-240 |
| Curium-241 |
Curium-242 |
Curium-243 |
| Curium244 |
Einsteinium-252 |
Einsteinium-253 |
| Einsteinium254 |
Einsteinium-255 |
Fermium-257 |
| Gadolinium-148 |
Mendelevium-258 |
Neptunium-235 |
| Plutonium-236 |
Plutonium-237 |
Plutonium-238 |
| Plutonium-241 |
Polonium-209 |
Polonium-210 |
| Polonium-208 |
Radium-223 |
Thorium-228 |
| Thorium-227 |
Uranium-230 |
Uranium-232 |
| 0B |
Prescribed Equipment |
| 0B001 |
Nuclear Reactors; associated equipment, components, and systems specially designed, prepared, or adapted or used or intended to be used in such reactors as follows:
a. Complete nuclear reactors
b. Nuclear reactor vessels
c. Nuclear reactor fuel charging and discharging machines
d. Nuclear reactor control rods and equipment
e. Nuclear reactor pressure tubes
f. Zirconium tubes and assemblies of tubes in which hafnium to zirconium ratio is 1:500 or less
g. Primary coolant pumps
h. Nuclear reactor internals
i. Heat exchangers (steam generators) for use in the primary coolant circuit of a nuclear reactor
j. Neutron detection and measuring instruments for determining neutron flux levels within the core of a nuclear reactor
|
| 0B002 |
Plants for processing, production, concentration, conversion or recovery of Prescribed Substances (such as uranium, plutonium, thorium, deuterium, heavy water, tritium, lithium); associated equipment, components and systems specially designed, prepared or adapted or used or intended to be used in such plants including but not limited to:
a. Plants for production or concentration of deuterium, heavy water-
1. Water - Hydrogen Sulphide Exchange Towers
2. Blowers and Compressors for hydrogen-sulphide gas circulation
3. Ammonia-Hydrogen Exchange Towers greater than or equal to 35 m in height with diameters of 1.5 m to 2.5 m
4. Tower Internals and Stage Pumps
5. Ammonia Crackers with operating pressures greater than or equal to 3 MPa
6. Infrared Absorption Analyzers capable of �on-line� hydrogen/ deuterium ratio analysis
7. Catalytic Burners for conversion of enriched deuterium gas into heavy water
8. Complete heavy water upgrade systems or columns therefor
b. Plants for the conversion of uranium
c. Plants for the conversion of plutonium
d. Tritium facilities or plants, and equipment therefor
e. Lithium isotope separation facilities or plants, and equipment therefor
|
| 0B003 |
Plants for reprocessing of irradiated nuclear fuel and equipment, components and systems specially designed, prepared or adapted or used or intended to be used in such plants, including but not limited to:
a. Irradiated fuel element chopping machines designed for remote operation
b. Dissolvers capable of withstanding hot and highly corrosive liquid for dissolution of irradiated nuclear fuel and which can be remotely loaded and maintained
c. Solvent extractors and solvent extraction equipment resistant to the corrosive effect of nitric acid
d. Chemical holding or storage vessels resistant to the corrosive effect of nitric acid
e. Industrial equipment including assemblies and components as follows:
1. High density (lead glass or other) radiation shielding windows
2. Radiation hardened TV cameras, or lenses therefor
3. �Robots� or �end effectors� specially designed for handling high explosives; and control units therefor
4. Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells
|
| 0B004 |
Plants for treatment, handling, storage and transportation of radioactive wastes from nuclear reactors or from plants for processing Source Materials or Special Fissionable Materials or from nuclear reprocessing plants; irradiated nuclear fuel; Special Fissionable Materials, and equipment specially designed, prepared, adapted, or intended to be used therefor. |
| 0B005 |
All systems, associated equipment, components for separation or enrichment of isotopes of uranium, plutonium, lithium or boron, other than analytical instruments, specially designed, prepared, adapted, used or intended to be used therefor as follows:
a. Gas centrifuges and assemblies and components specially designed or prepared for use in gas Centrifuges
b. Specially designed or prepared auxiliary systems, equipment and components for gas centrifuge enrichment plants
c. Specially designed or prepared assemblies and components for use in gaseous diffusion enrichment
d. Specially designed or prepared auxiliary systems, equipment and components for use in gaseous diffusion enrichment
e. Specially designed or prepared systems, equipment and components for use in aerodynamic enrichment plants
f. Specially designed or prepared systems, equipment and components for use in chemical exchange or ion exchange enrichment plants.
g. Specially designed or prepared systems, equipment and components for use in laser-based enrichment plants.
h. Specially designed or prepared systems, equipment and components for use in plasma separation enrichment plants.
i. Specially designed or prepared systems, equipment and components for use in electromagnetic enrichment plants.
|
| 0B006 |
Plants for the fabrication of nuclear reactor fuel elements, and equipment specially designed or prepared therefor including but not limited to:
a. fully automatic pellet inspection stations specially designed or prepared for checking final dimensions and surface defects of the fuel pellets;
b. automatic welding machines specially designed or prepared for welding end caps onto the fuel pins (or rods);
c. automatic test and inspection stations specially designed or prepared for checking the integrity of completed fuel pins (or rods).
Item �c� typically includes equipment for: 1) x-ray examination of pin (or rod) end cap welds, 2) helium leak detection from pressurized pins (or rods), and 3) gamma-ray scanning of the pins (or rods) to check for correct loading of the fuel pellets inside. |
| 0B007 |
Plants or systems for production, handling, storage and transportation of Radioisotopes in quantities exceeding 100 Curies (3.7 X 10 12 Becquerel). |
| 0B008 |
Neutron generators including neutron chain reacting assemblies and fusion assemblies of all kinds for producing fissile materials |
0C - Technology
Technology and software for the development, production or use of prescribed substances or prescribed equipment specified in 0A or 0B.
Category 1 - Toxic chemical agents and other chemicals
1A - Export of the following chemicals is prohibited:
(This corresponds to Schedule 1 to the Chemical Weapons Convention(CWC))
Note: Where reference is made below to groups of di-alkylated chemicals, followed by a list of alkyl groups in parentheses, all chemicals possible by all possible combinations and alkyl groups listed in parentheses are considered prohibited unless explicitly exempted.
(1). O-Alky ( (Me, Et,n-Pr or i-Pr) phosphonofluoridates
e.g. Sarin: O-Isopropy1 methylphosphonofluoridate
Soman: O-Pinacolyl methylphosphonofluoridate
(2). O-Alkyl, ( e.g. Tabun: O-Ethyl N,N,-dimethyl phosphoramidocyanidate
(3). O-Alkyl (H or < C10, incl. cycloalkyl) S-2-Dialkyl (Me, Et, n-Pr or i-Pr)-aminoethyl alkyl (Me, Et, n-Pr or i-Pr) phosphonothiolates and corresponding alkylated or protonated salts
e.g. VX: O-Ethyl S-2 diisopropylaminoethyl methyl phosphonothiolate
(4). Sulphur mustards:
2-Chloroethylchloromethylsulphide
Mustard gas: Bis (2-chloroethyl) sulphide
Bis (2-chloroethylthio) methane
Sesquimustard:1,2-Bis (2-chloroethylthio) ethane
1,3-Bis (2-chloroethylthio)-n-propane
1,4-Bis (2-chloroethylthio)-n-butane
1,5-Bis (2-chloroethylthio)-n-Pentane
Bis (2-Chloroethylthiomethyl) ether
O-Mustard: Bis (2-Chloroethylthiomethyl) ether
(5). Lewisites:
Lewisite 1: 2-Chlorovinyldichloroarsine
Lewisite 2: Bis (2-Chlorovinyl) chloroarsine
Lewisite 3: Tris (2-Chlorovinyl) arsine
(6). Nitrogen mustards:
HN1: Bis (2-chloroethyl) ethylamine
HN2: Bis (2-chloroethyl) Chloroarsine
HN3: Tris (2-chloroethyl) amine
(7). Saxitoxin
(8). Ricin
(9). Alkyl (Me, Et, n-Pr or I-Pr) phosphonyldifluorides
e.g. DF: Methyl phosphonyldifluoride
(10).O-Alkyl (H or < C10, incl. cycloalkyl) O-2 dialkyl (Me, Et, n-Pr or i-Pr)-aminoethylalkyl (Me, Et N-Pr or i-Pr) phosphonites and corresponding alkylated or protonated salts
e.g.QL: O-Ethyl O-2-diisopropylaminoethyl methyl phosphonite
(11).Chlorosarin: O-Isopropyl methylphosphonochloridate
(12).Chlorosoman: O-Pinacolyl methylphosphonochloridate
1B - Export of chemicals listed in 1B below is permitted only to States party to the Chemical Weapons Convention
(This corresponds to Schedule 2 to the Chemicals Weapons Convention)
Note to exporter:
(a) A list of States Parties can be obtained from the Disarmament & International Security Affairs Division of the Ministry of External Affairs (Room No. 40G, South Block, New Delhi) or at the official website of the Organization for the Prohibition of Chemical Weapons at www.opcw.org.
(b) A general permission valid for a period of two years may be applied for export of chemicals in this category. This permission shall be subject to the condition that for each export consignment, exporters shall, within 30 days of exports, notify the details to the National Authority, Chemical Weapons Convention, Cabinet Secretariat ; Ministry of External Affairs (D&ISA); Department of Chemicals and Petrochemicals and the Directorate General of Foreign Trade and submit to DGFT, a copy of Bill of Entry into the destination State Party within 30 days of delivery.
Note: Where reference is made below to groups of dialkylated chemicals, followed by a list of alkyl groups in parentheses, all chemicals possible by all possible combinations and alkyl groups listed in parentheses are included unless explicitly exempted.
1. Amiton 0,0-Diethyl S-[2-(diethylamino) ethyl)] phosphorothiolate and corresponding alkylated or protonated salts
2. PFIB: 1,1,3,3,3,-Pentafluoro-2-(trifluoromethyl)1-propene
3. BZ: 3-Quinuclidinyl benzilate (*)
4. Chemicals, except for those listed in Schedule 1, containing a phosphorus atom to which is bonded one methyl, ethyl or propyl (normal or iso) group but not further carbon atoms,
e.g. Methylphosphonyl dichloride
Dimethyl methylphosphonate
Exemption:- Fonofos: O-Ethyl S-phenyl ethylphosphonothiolothionate
5. N, N-Dialkyl (ME, Et, n-Pr or i-Pr) phosphoramidic dihalides
6. Dialkyl (Me, Et, n-Pr or i-Pr) N, N-dialkyl (Me, Et, n-Pr or i-Pr)-phosphoramidates
7. Arsenic trichloride
8. 2,2-Diphenyl-2 hydroxyacetic acid
9. Quinuclidine-3-ol
10. N,H-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethyl-2 -chlorides and corresponding protonated salts
11. N, N-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethane-2-ols and corresponding protonated salts
Exemptions: N,N-Dimethylaminoethanol and corresponding protonated salts
N,N-Diethylaminoethanol and corresponding protonated salts
12. N, N-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethane-2-thiols and corresponding protonated salts
13. Thiodiglycol: Bis(2-hydroxyethyl) sulphide
14. Pinacolyl alcohol: 3,3-Dimethylbutane-2-ol
A List of commercially important Schedule-2 Chemicals of CWC is given below :
| Sl. No. |
Name of Chemical |
Entry into Schedule |
CAS (Chemical Abstract Service) Numbers |
ITC(HS) codes |
| 1. |
2-Chloro N, N-Di-isopropyl ethylamine |
2B10 |
4261-68-1 |
29211911 |
| 2. |
Diethyl amino Ethanethiol |
2B12 |
100-38-9 |
29221910 |
| 3. |
O, O, Dimethyl Methyl Phosphonate |
2B04 |
756-79-6 |
29209045 |
| 4. |
2-Hydroxy N, N-Diisopropyl Ethylamine |
2B11 |
96-80-0 |
29221111 |
| 5. |
N, N-Diethyl Amino ethyl Chloride Hydrochloride |
2B10 |
869-24-9 |
29221112 |
| 6. |
Di-ethyl Amino ethanethiol Hydrochloride |
2B12 |
1942-52-5 |
29221113 |
| 7. |
Di-Methyl Amino ethyl chloride Hydrochloride |
2B10 |
4584-46-7 |
29221114 |
| 8. |
Di-Methyl Amino ethanethiol |
2B12 |
108-02-1 |
29221115 |
| 9. |
Di-Methyl Amino ethanethiol Hydrochloride |
2B12 |
13242-44-9 |
29221116 |
| 10. |
Phosphorothioic acid, S [2-(diethylamino) ethyl] O, O � diethyl ester |
2A01 |
78-53-5 |
29201010 |
| 11. |
1-Propene, 1,1, 3, 3, 3, - Pentafluoro � 2- (trifluoromethyl) (PFIB) |
2A02 |
382-21-8 |
29033011 |
| 12. |
Benzeneacetic acid, alphahydroxy � alpha-phenyl, 1 � azabicyclo [2.2.2.] oct-3-yl ester |
2A03 |
6581-06-2 |
29392910 |
| 13. |
Phosphonic Acid, Methyl-compound with (aminoimino methyl) urea (1: 1) |
2B04 |
84402-58-4 |
29209047 |
| 14. |
1-Propanaminium N, N, N-trimethyl � 3- [1-oxo-9 octadecenyl) amino]-. (Z)- methyl methylphosphonate |
2B04 |
70055-71-9 |
29209048 |
| 15. |
Phosphonic acid, [methyl bis (5-ethyl-2-methyl-2-oxido-1, 3, 2- dioxaphosphorinan-5-yl) methyl] ester |
2B04 |
42595-45-9 |
29209051 |
| 16. |
Phosphonic acid, [methyl-(5-ethyl-2-methyl 2-oxido-1,3,2-dioxaphosphorinan-5-yl) methyl] ester |
2B04 |
41203-81-0 |
29209052 |
| 17. |
Phosphonic acid, propyl-dimethyl ester |
2B04 |
18755-43-6 |
29209053 |
| 18. |
Phosphonous acid, methyl-diethyl ester |
2B04 |
15715-41-0 |
29209054 |
| 19. |
Phosphonic acid, ethyl- |
2B04 |
6779-09-5 |
29209055 |
| 20. |
Phosphonic acid, propyl- |
2B04 |
4672-38-2 |
29209056 |
| 21. |
Phosphinic acid, methyl- |
2B04 |
4206-94-4 |
29209057 |
| 22. |
Phosphonochloridic acid, methyl-, methyl ester |
2B04 |
1066-52-0 |
29209058 |
| 23. |
Phosphonothioic dichloride, ethyl- |
2B04 |
993-43-1 |
29209061 |
| 24. |
Phosphonic acid methyl- |
2B04 |
993-13-5 |
29209062 |
| 25. |
Phosphonic acid, methyl-, dimethyl ester |
2B04 |
756-79-6 |
29209063 |
| 26. |
Phosphonic dichloride, methyl- |
2B04 |
676-97-1 |
29209064 |
| 27. |
Phosphonous dichloride, methyl- |
2B04 |
676-83-5 |
29209065 |
| 28. |
Phosphonic acid, ethyl-, diethyl ester |
2B04 |
78-38-6 |
29209066 |
| 29. |
Arsenous trichloride |
2B07 |
7784-34-1 |
28121060 |
| 30. |
Benzeneacetic acid, alpha-hydroxy-alpha-phenyl |
2B08 |
76-93-7 |
29181910 |
| 31. |
1-Azabicyclo (2.2.2.) octan-3-ol |
2B09 |
1619-34-7 |
29333930 |
| 32. |
Ethanamine, 2-Chloro-N, N-dimethyl- |
2B10 |
107-99-3 |
29211914 |
| 33. |
Ethanol, 2-[bis(1-methylethyl ) amino ]- |
2B11 |
96-80-0 |
29221920 |
| 34. |
Ethanethiol, 2-(diethylamino)- |
2B12 |
100-38-9 |
29221930 |
| 35. |
Ethanol, 2, 2�-thiobis- |
2B13 |
111-48-8 |
29309091 |
| 36. |
2-Butanol, 3, 3-dimethyl- |
2B14 |
464-07-3 |
29051910 |
1C - Export of Chemicals as specified below is allowed to State Parties to the CWC without an export licence subject to the condition that the exporter shall notify within 30 days of export to the National Authority, Chemicals Weapons Convention, Cabinet Secretariat; the Ministry of External Affairs (D&ISA); the Department of Chemicals & Petro-chemicals, and the DGFT of such exports in the prescribed format ( Aayat Niryat Form ) along with the End-Use Certificate and submit to the DGFT a copy of the bill of entry into the destination State Party within 30 days of delivery. Export of chemicals as specified below to states not party to the Chemical Weapons Convention shall continue to be restricted and will be allowed only against an export licence, and in that case also exporters shall submit to the DGFT a copy of the bill of entry into the destination country within 30 days of export.
| Sl.No. |
Name of Chemical |
Entry into Schedule |
CAS Numbers |
ITC (HS) codes |
| 1. |
Phosgene : ( Carbonyl dichloride) |
3A01 |
75-44-5 |
28121010 |
| 2. |
Cyanogen chloride [(CN) C1] |
3A02 |
506-77-4 |
28510091 |
| 3. |
Hydrocyanic acid |
3A03 |
74-90-8 |
28111910 |
| 4. |
Chloropicrin: Trichloronitro-Methane |
3A04 |
76-06-2 |
29049080 |
| 5. |
Phosphorus Oxychloride |
3B05 |
10025-87-3 |
28121030 |
| 6. |
Phosphorus trichloride |
3B06 |
7719-12-2 |
28121021 |
| 7. |
Phosphorous Pentachloride |
3B07 |
10026-13-8 |
28121022 |
| 8. |
Trimethyl Phosphite |
3B08 |
121-45-9 |
29209041 |
| 9. |
Triethyl Phosphite |
3B09 |
122-52-1 |
29209042 |
| 10. |
Dimethyl Phosphite |
3B10 |
868-85-9 |
29209043 |
| 11. |
Diethyl Phosphite |
3B11 |
762-04-9 |
29209044 |
| 12. |
Sulphur monochloride |
3B12 |
10025-67-9 |
28121042 |
| 13. |
Sulphur dichloride |
3B13 |
10545-99-0 |
28121043 |
| 14. |
Thionyl Chloride |
3B14 |
7719-09-7 |
28121047 |
| 15. |
Ethyldiethanolamine |
3B15 |
139-87-7 |
29221211 |
| 16. |
Methyldiethanolamine |
3B16 |
105-59-9 |
29221212 |
| 17. |
Triethanolamine |
3B17 |
102-71-6 |
29221300 |
| Category 2 |
Micro-organisms, toxins |
| 2A |
Bacteria, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: |
| 2A001 |
Bacillus anthracis |
| 2A002 |
Bordetella bronchoseptica |
| 2A003 |
Brucella abortus, |
| 2A004 |
Brucella melitensis |
| 2A005 |
Brucella suis |
| 2A006 |
Chlamydia psittaci |
| 2A007 |
Clostridium botulinum |
| 2A008 |
Clostridium perfringes |
| 2A009 |
Corynebacterium diphtheriae |
| 2A010 |
Francisella tularensis |
| 2A011 |
Klebsiella pneumoniae |
| 2A012 |
Legionlla pneumophila |
| 2A013 |
Leptospira interrogans - all serotypes reported in India |
| 2A014 |
Mycobacterium bovis |
| 2A015 |
Mycobacterium tuberculosis |
| 2A016 |
Mycoplasma mycoides - var mycoides |
| 2A017 |
Mycoplasma mycoides - var Capri |
| 2A018 |
Neisseria meningitidis |
| 2A019 |
Paseturella multicoda type B |
| 2A020 |
Pseudomonas mallei |
| 2A021 |
Pseudomonas pseudomallei |
| 2A022 |
Salmonella paratyphi |
| 2A023 |
Shigella dysenteriae |
| 2A024 |
Staphylococcus aureus |
| 2A025 |
Streptococcus pneumoniae |
| 2A026 |
Vibrio cholerae elter |
| 2A027 |
Vibrio Cholerae 0139 |
| 2A028 |
Yersinia pestis |
| 2B |
Fungi, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: |
| 2B001 |
Blastomyces dermatitidis |
| 2B002 |
Coccidiodes immitis |
| 2B003 |
Histoplasma capulatum |
| 2B004 |
Nocardia asteroides |
| 2B005 |
Paracoccidioides braziliensis |
| 2C |
Parasites, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: |
| 2C001 |
Entamoeba histolytica |
| 2C002 |
Babesia microti |
| 2C003 |
Babesia divergens |
| 2C004 |
Blostidium coli |
| 2C005 |
Cryptosporidium spp. |
| 2C006 |
Leishmania species |
| 2C007 |
Naegleria australiensis |
| 2C008 |
Naegleria fowleri |
| 2C009 |
Plasmodium falciparum |
| 2C010 |
Pneumocystis carinii |
| 2C011 |
Schistosoma mansoni |
| 2C012 |
Schistosoma japonicum |
| 2C013 |
Schistosoma hemotobium |
| 2C014 |
Toxoplasma gondii |
| 2C015 |
Trichinella spiralis |
| 2C016 |
Trypanosoma bruiei |
| 2D |
Viruses, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: |
| 2D001 |
African Horse Sickness virus |
| 2D002 |
African Swine Fever virus |
| 2D003 |
Avian influenza virus |
| 2D004 |
Blue tongue virus |
| 2D005 |
Camel pox virus |
| 2D006 |
Chikungunya virus |
| 2D007 |
Crimean-Congo hemorrhagic fever virus |
| 2D008 |
Dengue virus |
| 2D009 |
Eastern equine encephalitis virus |
| 2D010 |
Ebola fever virus |
| 2D011 |
Encephalomyocarditis virus (EMC) |
| 2D012 |
Foot and Mouth Disease virus (all serotypes and subtypes) |
| 2D013 |
Guanirito virus |
| 2D014 |
Goatpox virus |
| 2D015 |
Hantaan virus |
| 2D016 |
Herpes virus simiae (monkey B virus) |
| 2D017 |
Herpes ateles, Herpes saimiri |
| 2D018 |
HIV- 1 & HIV-2 and other strains of SIV |
| 2D019 |
Hog cholera virus |
| 2D020 |
Human T-cell Leukemia virus |
| 2D021 |
Junin virus |
| 2D022 |
Japanese encephalitis virus |
| 2D023 |
Kyasanur Forest Disease virus and Central European encephalitis viruses. |
| 2D024 |
Korean hemorrhagic fever virus |
| 2D025 |
Lymphocytic choriomeningitis virus (LCM) |
| 2D026 |
Lassa virus |
| 2D027 |
Marburg virus |
| 2D028 |
Murrey valley encephalitis virus |
| 2D029 |
Marchupo virus |
| 2D030 |
Mason-pfizer monkey virus |
| 2D031 |
Monkey pox virus |
| 2D032 |
Newcastle disease virus |
| 2D033 |
Omsk hemorrhagic fever virus |
| 2D034 |
Peste des petits ruminant virus |
| 2D035 |
Porcine enterovirus type I |
| 2D036 |
Powassan virus |
| 2D037 |
Rabies virus -all strains |
| 2D038 |
Respiratory syncitial virus |
| 2D039 |
Rift Valley Fever virus |
| 2D040 |
Rinderpest virus |
| 2D041 |
Sabia virus |
| 2D042 |
Sheep pox (field strain) |
| 2D043 |
Sin Nombre virus |
| 2D044 |
Smallpox virus |
| 2D045 |
St.Louis encephalitis virus |
| 2D046 |
Swine Fever virus |
| 2D047 |
Tick-borne encephalitis virus (Russian Spring Summer Encephalitis virus) |
| 2D048 |
Teschen disease virus (Porcine entero virus type 1) |
| 2D049 |
Variola virus |
| 2D050 |
Venezuelan encephalitis virus |
| 2D051 |
Vesicular stomatitis virus |
| 2D052 |
Western encephalitis virus |
| 2D053 |
Yellow fever virus, 17 D vaccine strain |
| 2E |
Rickettsials, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: |
| 2E001 |
Coxiella burnetti |
| 2E002 |
Rickettsiae rickettsii |
| 2E003 |
Rickettsia quintana |
| 2E004 |
Rickettsia prowazebi |
| 2F |
Toxins |
| 2F001 |
Abrins |
| 2F002 |
Aflatoxins |
| 2F003 |
Anatoxins |
| 2F004 |
Botulinum toxin (s) (clostradium botulinum) |
| 2F005 |
Bungarotoxins |
| 2F006 |
Clostridium perfringens toxins |
| 2F007 |
Corynebacterium diphtheriae toxins |
| 2F008 |
Cyanginosins (Microcystins) (Microcystic aeuginosa) |
| 2F009 |
Enterotoxin (Staphylococcus aureus) |
| 2F010 |
Neurotoxin (Shigella dysenteriae) |
| 2F011 |
Ricins |
| 2F012 |
Shigatoxins |
| 2F013 |
Saxitoxins |
| 2F014 |
Trichothecene mycotoxins |
| 2F015 |
Tetanus toxin (clostridium tetani) |
| 2F016 |
Tetrodotoxin (Spheroides rufripes) |
| 2F017 |
Verrucologen (M. verrucadia) |
| 2G |
Plant pathogens |
| 2G001 |
Bemisia tabaci |
| 2G002 |
Colletotrichum coffeanum var. virulans |
| 2G003 |
Clavicep purpurea |
| 2G004 |
Dothistroma pini (Scirrhia pini) |
| 2G005 |
Erwinia amylovora |
| 2G006 |
Frankliniella occidentalis |
| 2G007 |
Microcyclus ulei |
| 2G008 |
Peronospora hyoscyami de Bary f.sp. tabacina (Adam) skalicky |
| 2G009 |
Phytophthora infestans |
| 2G010 |
Puccinia graminis |
| 2G011 |
Puccinia erianthi |
| 2G012 |
Puccinia striiformiis (Puccinia glumarum) |
| 2G013 |
Pyricularia oryzae |
| 2G014 |
Pseudomonas solanacearum |
| 2G015 |
Peronospora hyscyami de Bary |
| 2G016 |
Ralstonia solanacearum |
| 2G017 |
Sugar cane Fiji disease virus |
| 2G018 |
Sclerotinia sclerotiorum |
| 2G019 |
Tilletia indica |
| 2G020 |
Thrips palmi |
| 2G021 |
Ustilago Maydis |
| 2G022 |
Xanthomonas albilineans |
| 2G023 |
Xanthomonas campestris pv citri |
| 2G024 |
Xanthomonas campestris pv oryzae |
| 2H |
Genetically Modified Organisms |
| 2H001 |
Genetically-modified micro-organisms or genetic elements that contain nucleic acid sequences associated with pathogenicity and are derived from organisms specified above in 2A, 2B, 2C, 2D, 2E and 2H.
Genetically-modified micro-organisms or genetic elements that contain nucleic acid sequences coding for any of the toxins specified above in 2F |
| Category 3 |
Materials, Materials Processing Equipment and related technologies |
| 3A |
Materials |
| 3A1 |
Special Materials |
| 3A101 |
Zirconium, magnesium and alloys of these in particle size less than 60 �m |
| 3A102 |
Maraging steel in any form in which any linear dimension exceeds 75 mm |
| 3A103 |
Tungsten, molybdenum, and alloys of those metals in the form of uniform spherical or atomized particles of size less than 500 �m |
| 3A104 |
Germanium |
| 3A105 |
Gallium |
| 3A106 |
Indium |
| 3A107 |
Titanium alloys including Titanium-stabilised Duplex Stainless Steel (Ti-DSS) (other than as specified at 0A307) |
| 3A108 |
Aluminium alloys in any form �capable of acquiring� an ultimate tensile strength of 460 MPa or more at 293 K (20 degrees C)
Note: The phrase �capable of acquiring� encompasses alloys before or after heat treatment |
| 3A109 |
Bismuth having a purity of 99.99% or greater by weight and containing less than 10 parts per million by weight of silver |
| 3A110 |
Calcium containing less than 1000 parts per million by weight of metallic impurities other than magnesium and containing less than 10 parts per million by weight of Boron |
| 3A111 |
Chlorine trifluoride (ClF3) |
| 3A112 |
Magnesium containing less than 200 parts per million by weight of metallic impurities other than calcium and containing less than 10 parts per million by weight of boron |
| 3A113 |
Tungsten, tungsten carbide, and alloys containing more than 90% tungsten by weight in forms with a hollow cylindrical symmetry (including cylinder segments) with an inside diameter between 100 and 300 mm and a mass greater than 20 kg. |
| 3A114 |
a. Nickel powder of purity 99.0% or greater by weight and having a mean particle size of less than 10 �m;
b. Porous nickel metal produced from the nickel powder specified above |
| 3A115 |
Natural boron, boron carbide or metal borides having a boron purity of 98% or more. |
| 3A116 |
�Fibrous or filamentary materials�, and prepregs, as follows:
a. Carbon or aramid �fibrous or filamentary materials� having �specific modulus� of 12.7 x 106 m or greater; or �specific tensile strength� of 23.5 x 104 m or greater;
b. Glass �fibrous or filamentary materials� having �specific modulus� of 3.18 x 106 m or greater; and �specific tensile strength� of 7.62 x 104 m or greater;
c. Thermoset resin impregnated continuous �yarns�, �rovings�, �tows� or �tapes� with a width of 15 mm or less (prepregs), made from carbon or glass �fibrous or filamentary materials� specified in (a) or (b) above. |
| 3A117 |
Carbon - carbon composites. |
| 3A2 |
Structural Materials |
| 3A201 |
Structural materials such as:
a. Composite structures, laminates, and manufactures thereof, including resin impregnated fibre prepregs and metal coated fibre preforms made either with an organic matrix or metal matrix utilizing fibrous or filamentary reinforcements, specially designed for use in rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles and subsystems thereof;
b. Resaturated pyrolized (i.e. Carbon-Carbon) materials specially designed for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles;
c. Fine grain re-crystalised bulk graphites and pyrolytic or fibrous reinforced graphites for rocket nozzles and re-entry vehicles nose tips;
d. Ceramic composite materials(dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in missile radomes and nose tips;
e. Structured materials and coatings for reduced radar reflectivity;
f. Bulk machinable silicon-carbide reinforced unfired ceramic usable in re-entry vehicles nose tips. |
| 3A3 |
Rocket propellants and constituent chemicals: |
| 3A301 |
Propulsive substances - Hydrazine, Monomethylhydrazine (MMH), Unsymmetrical di-methyl hydrazine (UDMH) (except aromatic hydrazines and their salts, adipic acid dihydrazide), ammonium perchlorate, spherical aluminium powder; |
| 3A302 |
Metal fuels containing any of the following: Zirconium, beryllium, titanium, tungsten, boron and boron alloys, zinc, and alloys of magnesium; |
| 3A303 |
Polymeric substances:
Carboxyl-terminated polybutadiene (CTPB)
Hydroxy-Terminated Polybutadiene (HTPB)
Glycidyl azide polymer (GAP)
Polybutadiene acrylic acid (PBAA)
Polybutadiene acrylonitrile (PBAN) |
| 3A304 |
Composite propellants and composite modified double base propellants; |
| 3A305 |
High energy density fuels such as boron slurry; |
| 3A306 |
Oxidizers/fuels - Perchlorates, chlorates or chromates mixed with powdered metals or other high energy fuel components; Dinitrogen trioxide, Nitrogen dioxide / Dinitrogen tetroxide, Mixed Oxides of Nitrogen (MON), Dinitrogen pentoxide, Inhibited red fuming nitric acid (IRFNA), Ammonium perchlorate, Ammonium Dinitramide (ADN); Hydrazinium Nitroformate (HNF), Compounds composed of fluorine and one more of other halogens, oxygen or nitrogen. |
| 3A307 |
Bonding agents - Tris (1-2 (2-methyl)) aziridinyl phosphine oxide (MAPO), Trimesoyl-1-(2-ethyl) aziridene (HX-868, BITA), Tepanol (HX-878), Tepan (HX-879), HX-752, HX-874, HX-877; |
| 3A308 |
Curing agents and catalysts - Triphyenyl bismuth (TPB); |
| 3A309 |
Burning rate modifiers �
a. Carboranes, decaboranes, pentaboranes and derivatives thereof;
b. Ferrocene derivatives, as follows:
1. Catocene;
2. Ethyl ferrocene;
3. Propyl ferrocene;
4. n-Butyl ferrocene;
5. Pentyl ferrocene;
6. Dicyclopentyl ferrocene;
7. Dicyclohexyl ferrocene;
8. Diethyl ferrocene;
9. Dipropyl ferrocene;
10. Dibutyl ferrocene;
11. Dihexyl ferrocene;
12. Acetyl ferrocenes;
13. Ferrocene Carboxylic acids;
14. Butacene;
c. Other ferrocene derivatives usable as rocket propellant burning rate modifiers. |
| 3A310 |
Nitrate esters and nitrated plasticisers as follows:
a. Triethylene glycol dinitrate (TEGDN);
b. Trimethylolethane trinitrate (TMETN);
c. 1,2,4-butanetriol trinitrate (BTTN);
d. Diethylene glycol dinitrate (DEGDN).
|
| 3A311 |
Stabilisers as follows:
a. 2-Nitrodiphenylamine;
b. N-methyl-p-nitroaniline.
|
| 3A4 |
High explosives |
| 3A401 |
High explosives, and propellants or mixtures containing any of the following;
a. Cycloteramethylenetetranitramine (HMX);
b. Cyclotrimethylenetrinitramine (RDX);
c. Triaminotrinitrobenzene (TATB);
d. Hexanitrostilbene (HNS).
License applications for the export of items at 3A401a and 3A401b will normally be denied. |
| 3A5 |
Stealth materials |
| 3A501 |
Materials (and devices therefrom) for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures; |
| 3A502 |
Structural materials and coatings (including paints) specially designed for reduced or tailored reflectivity or emissivity in the microwave, infrared or ultraviolet spectra other than coatings (including paints) when specially used for thermal control of satellites. |
| 3A503 |
�Technology� related to the production or use of items in 3A. |
| 3B |
Materials processing and production equipment, and related technology |
| 3B001 |
Remote manipulators that provide mechanical translation of human operator actions by electrical, hydraulic or mechanical means and operating arm and terminal fixture that can be used to provide remote actions; |
| 3B002 |
Multidirectional, multidimensional weaving and interlacing machines, including adapters and modification kits for weaving, interlacing or braiding fibres to fabricate composite structures except textile machinery which has not been modified for rocket systems; |
| 3B003 |
Equipment designed or modified for production of fibrous or filamentary materials as follows: converting polymeric substances; vapour deposition on heated filament substrates; wet spinning of refractory ceramics. |
| 3B004 |
Equipment designed or modified for special fibre surface treatment or for producing prepregs and preforms, including rollers, tension stretchers, coating equipment, cutting equipment and clicker dies; |
| 3B005 |
Chemical vapour deposition furnaces designed or modified for the densification of carbon?carbon composites. |
| 3B006 |
Pyrolytic deposition and densification equipment including:
a. Technology for producing pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases.
b. Specially designed nozzles for the above process.
c. Equipment and process controls and specially designated software thereof, specially designed for densification and pyrolysis of structural composite rocket nozzles and re-entry vehicle nose tips. |
| 3B007 |
Production equipment specially designed or modified for production, handling, mixing, curing, casting, pressing, machining or acceptance testing of the solid or liquid rocket propellants or rocket propellant constituents and related technology. |
| 3B008 |
Refrigeration units and equipment capable of cooling hydrogen or helium to -250 degrees Celsius (23K) or lower. |
| 3B009 |
Continuous nitrators. |
| 3B010 |
Dehydration presses. |
| 3B011 |
Screw extruders specially designed or modified for high explosive extrusion. |
| 3B012 |
Cutting machines for the sizing of extruded propellant. |
| 3B013 |
Sweetie barrels (tumblers) 1.85 m or more in diameter and having over 227 kg product capacity; |
| 3B014 |
Continuous mixers or batch mixers with provision for mixing under vacuum for solid propellants. |
| 3B015 |
Fluid energy mills usable for grinding or milling any of the items in 3A3. |
| 3B016 |
Equipment to achieve both sphericity and uniform particle size in metal powders.
a. Metal powder production equipment usable for production, in a controlled environment, of spherical or atomized materials including:
b. Plasma generators (high frequency arc-jets) usable for obtaining sputtered or spherical metallic powders with organisation of the process in an argon-water environment
c. Electroburst equipment usable for obtaining sputtered or spherical metallic powders with organisation of the process in an argon-water environment. |
| 3B017 |
Sputter ion pumps |
| 3B018 |
Technical data (including processing conditions) and procedures for the regulation of temperature, pressure or atmosphere in autoclaves or hydroclaves when used for the production of composites or partially processed composites. |
| 3B019 |
�Software� specially designed or modified for the use of equipment for the production and handling of materials specified in 3A |
| 3B020 |
�Technology� related to the development, production or use of items in 3B |
| 3C |
[Reserved] |
| 3D |
Chemical and biomaterial manufacturing and handling equipment and facilities: |
| 3D001 |
Reaction vessels, reactors or agitators, storage tanks, containers or receivers, heat exchangers or condensers, distillation or absorption columns, valves, remotely operated filling equipment, multi-walled piping, bellows, diaphragm pumps, vacuum pumps, fans, compressors, blowers, gas (including air) handling or other substance-transfer equipment wholly or partly made from any of the following materials;
a. Nickel or alloys with more than 40% nickel by weight
b. Alloys with more than 25% nickel and 20% chromium by weight (e.g. �Hastelloy�, �Illium�. �Inconel�, �Incoloy�)
c. Fluoropolymers
d. Glass or glass lined (including vitrified or enamelled coating)
e. Graphite
f. Tantalum or tantalum alloys
g. Titanium or titanium alloys
h. Zirconium or zirconium alloys
i. Ceramics
j. Ferrosilicon
Note: 3D001 does not control the following items:
a. Open vessels fabricated from glass sheets (such as aquariums, water tanks etc.); or cookware, table-ware, decorative glass or ceramic items (such as vases, art objects, etc.)
b. Glass-ware (whether or not metal-jacketed) or glass-lined reaction vessels or reactors, whether or not equipped with agitators, provided that the total internal (geometric) volume of each vessel or reactor is greater than 20,000 litres (20 m3) or less than or equal to 100 litres (0.1 m3). Examples of the latter capacity glass or ceramic-ware include standard laboratory equipment such as test tubes, flasks, retorts etc. |
| 3D002 |
Incinerators designed to destroy any chemicals specified in Category 1. |
| 3D003 |
Combustors or pyrolysers capable of a heat-zone (�burner�) temperature greater than 1,273 K (1000 Degree Centigrade), and in which any surfaces that come into direct contact with material coming into the containing chamber are made from, or lined with, any of the following materials:
a. Alloys with more than 25% nickel and 25% chromium by weight; (e.g., �Hatelloy�, �Illium�, �Inconel�, �Incoloy�)
b. Nickel, or alloys with more than 40% nickel by weight; or
c. Titanium;
d. Ceramics. |
| 3D004 |
Equipment related to P3, P4 facilities such as protective suits and class III safety cabinets.
No licenses shall be granted for complete containment facilities at P3, P4, containment level as specified in the World Health Organization (WHO) bio-safety manual. |
| 3D005 |
�Technology� related to the development, production or use of items in 3D |
(Please refer POLICY CIR NO. 10/2006, DT. 20/06/2006 - Chemical Weapons Convention (CWC) � enabling accurate submissions of the same to Organization for Prohibition of Chemical Weapons (OPCW))
NEXT
|