Notification
No. 65 dated 25th June 2001 (As amended
by Customs Notification No. 101 dated 4th October 2002)
Whereas in the matter of import of
certain grades/ types of alloy and non-alloy steel billets, bars and rounds of
sizes 70 mm to 250 mm diameter conforming to Indian Standards specifications or
any other international specifications equivalent to Indian Standards
specifications, which are listed in the Annexure
and falling under sub-heading No. 7206.90, 7207.19 and 7207.20, of the Customs
Tariff Act, 1975 (51 of 1975) originating in, or exported from, Russia, China
and Ukraine, the Designated Authority vide its preliminary findings, published
in the Gazette of India, Extraordinary, Part I, Section 1, dated the 1st
December, 2000, has come to the conclusion that -
(i) exporters from Russia and China have been
exporting subject goods below normal value, resulting in dumping;
(ii)���������� the Indian industry has suffered
material injury;
(iii)��������� injury has been caused cumulatively by
the dumped imports of the subject goods from Russia and China.
And has considered it necessary to
impose anti-dumping duty, provisionally, pending final determination, on all
imports of the subject goods, originating in, or exported from, Russia and
China;
And Whereas on the basis of the
aforesaid findings of the Designated Authority, the Central Government had
imposed anti-dumping duty vide notification of the Government of India in the
Ministry of Finance (Department of Revenue), No. 151/2000-Customs dated the 26th
December, 2000 [G.S.R. 931(E) dated the 26th December, 2000],
published in Part ll, section 3, Sub-section (i) of the Gazette of India,
Extraordinary, dated the 26th December, 2000;
And Whereas the designated authority
vide its final findings dated the 1st June 2001, published in the
Gazette of India, Extraordinary, Part l, Section l, dated the 1st
June, 2001, has come to the conclusion that-
(i) the subject goods have been exported from
Russia and China to India below its normal value;
(ii)���������� the Indian Industry has suffered
material injury ;
(iii)��������� the injury has been caused by the
imports from the subject countries,
Now, therefore, in exercise of powers
conferred by sub-section (1), read with sub-section (5), of section 9A of the
said Customs Tariff Act, and rules 18 and 20 of the Customs Tariff
(Identification, Assessment and Collection of Anti-dumping Duty on Dumped
Articles and for Determination of Injury) Rules, 1995, the Central Government,
on the basis of the aforesaid final findings of the Designated Authority,
hereby imposes on the grades/ types of alloy and non-alloy steel billets, bars
and rounds of sizes 70 mm to 250 mm diameter conforming to Indian Standards
specifications or any other international specification equivalent to Indian
Standards specifications, which are listed in the said Annexure and falling under sub-heading No.
7206.90, 7207.19 and 7207.20, of the said Customs Tariff Act, originating in,
or exported from, the countries specified in column (2) of the Table below,
when exported by the exporters�
mentioned against the corresponding�
country in column (3) of the said Table, and imported into India, an
anti-dumping duty at the rate which is equivalent to the corresponding amount
mentioned in column (4) of the said Table.
S. No.
|
Country
|
Exporter
|
Amount of
duty� (US $ per metric tonne)
|
(1)
|
(2)
|
(3)
|
(4)
|
1.
|
Russia
|
(i) M/s Oscol Electrometallurgical
Combinat (OEMK), Manufacturer and M/s Salzgitter International GmbH, Germany,
The Exporter
|
14.09
|
(ii) Other
exporters
|
90
|
2.
|
Peoples Republic of China
|
All exporters
|
133
|
2.���� The anti-dumping duty imposed under this
notification shall be levied with effect from the date of the imposition of the
provisional duty, i.e. the 26th December 2000; and shall be
paid in Indian currency.
Explanation:
For the purposes of this notification, the �rate of exchange� applicable for
the purposes of calculation of such anti-dumping duty shall be the rate, which
is specified in the notification of the Government of India in the Ministry of
Finance (Department of Revenue), issued from time to time, in exercise of
powers under sub-clause (i) of clause (a) of sub-section (3) of section 14 of
the Customs Act, 1962 (52 of 1962) and the relevant date for determination of
the �rate of exchange� shall be the date of presentation of the �bill of entry�
under section 46 of the said Customs Act.
S. No.
|
Indian
Standards Specification
|
Equivalent
International Specification
|
1.
|
I.S. 1875, Cl 1
|
ASTM, SA 192, AP15L Gr X 42
|
(Non Alloy Steel)
|
B53059PT �2Gr 243, DIN, CK 15
|
2.
|
I.S. 1875,
Cl 1A
|
SAE 1018, ASTMA 333
|
(Non Alloy Steel)
|
|
3
|
I.S. 1875, Cl 2
|
SA 1026
|
(Non Alloy Steel)
|
|
4.
|
I.S. 1875, Cl 2A
|
ASTM, SA210A1, AP1SLGrB
|
(Non Alloy Steel)
|
APISLGrX 46, APISL X � 46
|
5.
|
I.S. 1875, Cl3
|
ASTM, SA 210 GrC, SAE 1030
|
(Non Alloy Steel)
|
|
6.
|
I.S. 1875, Cl 3A
|
SAE 140, SAE 1035
|
(Non Alloy Steel)
|
|
7.
|
I.S. 1875, Cl 4
|
BS, En 8D
|
(Non Alloy Steel)
|
|
8.
|
I.S. 1875, Cl 5
|
SAE 1050
|
(Non Alloy Steel)
|
|
9.
|
I.S. 5517, 27C15
|
SAE 1530
|
(Non Alloy Steel)
|
|
10.
|
I.S. 5517, 37C 15
|
BS, En15, SAE 1541
|
(Non Alloy Steel)
|
|
11.
|
I.S. 4432, 10 C4
|
ASTM, SA 179, SAE 1010
|
(Non Alloy Steel)
|
SAE 1008
|
12.
|
I.S. 4368, 20Mn 2
|
DIN 2391 st 52, SAE 1518
|
(Non Alloy Steel)
|
|
13.
|
I.S. 5517, 35 Mn 6Mo 3
|
API N80, SAE 4042
|
(Non Alloy Steel)
|
|
14.
|
I.S. Equivalent Not Available
(Alloy Steel)
|
SAE 4130
|
15.
|
I.S. Equivalent Not Available
(Alloy Steel)
|
SAE 4118 (Nearest)
|
16.
|
I.S. Equivalent Not Available
(Alloy Steel)
|
BS 3602 Pt 1500 Nb (Micro alloyed
Steel)
|
17.
|
I.S. Equivalent Not Available (Non
Alloy Steel)
|
BS 3059 Pt II Gr 440
|
18.
|
I.S. Equivalent Not Available (Non
Alloy Steel)
|
SAE 1518
|
19.
|
I.S. 4398, 103 Cr2 (Alloy Steel)
|
SAE 52100
|
20.
|
I.S. 4368 20 Mn Cr 1
|
20 MNCRS
|
21.
|
I.S. 3749 T 105 Cr 5
|
|
22.
|
I.S. 3930 40 Cr 4 Mo 3
|
|
23.
|
I.S. 4368 21 Cr 1 Mo 28
|
|
24.
|
I.S. 5517 27 Cl 5 + Mo
|
|
25.
|
I.S. 4432 C 10
|
MSL 4A
|
26.
|
I.S. 5517 37 C 15
|
|
27.
|
I.S. 4368 37 Sl 2 Mn 90
|
|
28.
|
I.S. 5517 3795 37 C 15 + Mo
|
|
29.
|
I.S. 4368 40 Ni 2 Cr 1 Mo 28
|
|