|
DEPB rate list
Public Notice No. 52 dated 1st March 2000
In exercise of powers conferred under paragraph 4.11 of the Export and Import Policy, 1997-2002, as notified in the Gazette of India extraordinary, Part-II-Section 3-Sub- section (ii) vide S.O. No. 283(E) dated 31.3.97, the Director General of Foreign Trade hereby makes the following amendment in the Handbook of Procedures (Vol.1) (RE-99), 1997-2002.
2. The following amendments may be made in Appendix-28A.
(i) Under Product Group: Engineering (product Code 61), following new entries may be added after S.No.586:
|
S.No.
|
Description
|
DEPB rate
|
Value cap for DEPB entitlement
|
|
587
|
Identifiable ready to use machined parts/components made wholly or predominantly of Carbon Steel/Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not else where specified
|
12%
|
|
|
588
|
Identifiable ready to use machined parts/ components made wholly or predominantly of Alloy steel/Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified
|
12%
|
|
|
589
|
Identifiable ready to use-machined parts/ components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through casting process, not elsewhere specified.
|
7%
|
|
|
590
|
Identifiable ready to use-machined parts/ components made wholly or predominantly of carbon steel/ Non-alloy steel (not less than 90% by weight) manufactured through casting process, not elsewhere specified.
|
8%
|
|
|
591
|
Identifiable ready to use machined parts/components made wholly or predominantly of alloy steel (other than Stainless Steel) (not less than 90% by weight) manufactured through casting process, not elsewhere specified.
|
8%
|
|
|
592
|
Identifiable ready to use machined parts/components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through casting process
|
13%
|
|
|
593
|
Brake Drums made of Alloy Cast Iron
|
12%
|
|
(ii) Under Product Group: Engineering (product Code 61), the DEPB rate mentioned in column 3 against export product at S.No. 91 and 363 may be amended to read as 19% for both product.
(iii) Under Product Group Textiles: (Product Code-89), the following amendments may be made;
(a) The existing entry at S.No.11 may be deleted and the description of export product at S.No. 10 may be amended to read as:
Cotton Socks/ Stockings (Knitted)
(b) The following new entry may be created at S.No. 68(d):
|
S.No.
|
Description
|
DEPB rate
|
Value cap for DEPB entitlement
|
|
68(d)
|
"Article of Hosiery/Knitwear made of woollen blended yarn (synthetic content in the blended yarn below 35%)"
|
7%
|
|
(c) The description of export product at S.No. 44(a) may be amended to read as follows:
"Dyed and/ or printed manmade - cotton blended fabric 'with or without embroidery' and/ or 'with or without metallised yarn' (manmade content not less than 50% by weight)"
(d) The description of export product at S.No.73 may be amended to read as under:
"Dyed Finished Flax blended fabrics (containing polyester/ viscose/ cotton/ flax)
Note: The export product must contain Flax and one or more of other inputs i.e. polyester/ viscose/ cotton"
(iv) Under Product Group: Chemical (Product Code-62), the following amendments may be made:
(a) The entry at S.No. 917 stands deleted. The export product at S.No.493 and 917 may be clubbed together at S.No.493 with following description and DEPB rate:
|
S.No.
|
Description
|
DEPB rate
|
Value cap
|
|
493
|
Paper such as Cyclostyling paper, Typing paper, Xerox paper, Copier paper, Full scape ruled/ Unruled paper, Plain paper, Drawing sheets, etc/MG poster paper/Manila Board/ Writing paper/ Colour Printing Paper/NP Printing Paper
|
8%
|
|
(v) Under Product Group: Plastics (Product Code 63), the following amendments may be made:
(a) The description of export product at S.No.1 21 may be amended to road as:
"Polyurethane Resin Solution containing 66% Resin in Ethyl Acetate Solvent/ Methyl Ethyl Ketone Solvent."
(b) The following entry shall be added at S.No.144 with the following description and DEPB rate:
|
S.No.
|
Description
|
DEPB rate
|
Value cap
|
|
144
|
Poly propylene- (Homo Polymer)
|
11%
|
|
(vi) Under the general instruction at the beginning of Appendix 28A, the following may be added after S.No.6:
(vii) Portable Products at S.No.266, 267, 268, 269, 270 and 3,16 of Product Group: Engineering (Product Code-61) exported in the form of incompiete CKD/ SKD Kit, but consisting of (i) Engine (ii) Chasis (iii) Gear Box (iv) Transmission Assenibly System (v) Axle (Front & Rear) and (vi) Suspension System or Body/ Cab or both shall be treated at par with complete CKD/ SKD Kit for the purpose of relevant DPEB benefits.
|